1. Chromosomes and Gene Expression
  2. Genetics and Genomics

m6A modification of U6 snRNA modulates usage of two major classes of pre-mRNA 5’ splice site

  1. Matthew T Parker
  2. Beth K Soanes
  3. Jelena Kusakina
  4. Antoine Larrieu
  5. Katarzyna Knop
  6. Nisha Joy
  7. Friedrich Breidenbach
  8. Anna V Sherwood
  9. Geoffrey J Barton
  10. Sebastian M Fica
  11. Brendan H Davies  Is a corresponding author
  12. Gordon G Simpson  Is a corresponding author
  1. School of Life Sciences, University of Dundee, United Kingdom
  2. Centre for Plant Sciences, School of Biology, Faculty of Biological Sciences, University of Leeds, United Kingdom
  3. RNA Biology and Molecular Physiology, Faculty of Biology, Bielefeld University, Germany
  4. Department of Biochemistry, University of Oxford, United Kingdom
  5. Cell & Molecular Sciences, James Hutton Institute, United Kingdom
https://doi.org/10.7554/eLife.78808
Share this article
Cite this article
  1. Matthew T Parker
  2. Beth K Soanes
  3. Jelena Kusakina
  4. Antoine Larrieu
  5. Katarzyna Knop
  6. Nisha Joy
  7. Friedrich Breidenbach
  8. Anna V Sherwood
  9. Geoffrey J Barton
  10. Sebastian M Fica
  11. Brendan H Davies
  12. Gordon G Simpson
(2022)
m6A modification of U6 snRNA modulates usage of two major classes of pre-mRNA 5’ splice site
eLife 11:e78808.
https://doi.org/10.7554/eLife.78808
  2. Download BibTeX
  3. Download .RIS

Abstract

Alternative splicing of messenger RNAs is associated with the evolution of developmentally complex eukaryotes. Splicing is mediated by the spliceosome, and docking of the pre-mRNA 5’ splice site into the spliceosome active site depends upon pairing with the conserved ACAGA sequence of U6 snRNA. In some species, including humans, the central adenosine of the ACAGA box is modified by N6 methylation, but the role of this m6A modification is poorly understood. Here, we show that m6A modified U6 snRNA determines the accuracy and efficiency of splicing. We reveal that the conserved methyltransferase, FIONA1, is required for Arabidopsis U6 snRNA m6A modification. Arabidopsis fio1 mutants show disrupted patterns of splicing that can be explained by the sequence composition of 5’ splice sites and cooperative roles for U5 and U6 snRNA in splice site selection. U6 snRNA m6A influences 3’ splice site usage. We generalise these findings to reveal two major classes of 5’ splice site in diverse eukaryotes, which display anti-correlated interaction potential with U5 snRNA loop 1 and the U6 snRNA ACAGA box. We conclude that U6 snRNA m6A modification contributes to the selection of degenerate 5’ splice sites crucial to alternative splicing.

Editor's evaluation

This is an important paper reporting that an adenosine methyltransferase in the model plant Arabidopsis functions to target a key RNA component of the spliceosome, as in fission yeast, and thereby contributes to intron recognition as well as flowering timing. By contrast, the authors report no major role for the methyltransferase in targeting mRNAs, as reported in several previous studies in Arabidopsis. Overall, the approaches are convincing, although a correlative analysis identifying an intronic sequence feature characteristic of methyltransferase-sensitive introns is not followed up with tests to establish causality of this feature.

https://doi.org/10.7554/eLife.78808.sa0

eLife digest

All the information necessary to build the proteins that perform the biological processes required for life is encoded in the DNA of an organism. Making these proteins requires the DNA sequence of a gene to be transcribed into a ‘messenger RNA’ (mRNA), which is then processed into a final, mature form. This blueprint is then translated to assemble the corresponding protein.

When an mRNA is processed, segments of the sequence that do not code for protein are removed and the remaining coding sequences are joined together in the right order. An intricate molecular machine known as the spliceosome controls this mechanism by recognising the ‘splice sites’ where coding and non-coding sequences meet. Depending on external conditions, the spliceosome can ‘pick-and-mix’ the coding sequences to create different processed mRNAs (and therefore proteins) from a single gene. This alternative splicing mechanism is often used to regulate when certain biological processes take place based on environmental cues; for example, the splicing of genes which control the timing of plant flowering is sensitive to ambient temperatures.

To investigate this mechanism, Parker et al. focused on Arabidopsis thaliana, a plant that blooms later when temperatures are low. This precise timing partly relies on a gene whose mRNA is efficiently spliced in the cold, resulting in an active form of its protein that blocks blooming. Parker et al. grew and screened many A. thaliana plants to find individuals that could flower early in the cold, in which splicing of this gene was disrupted.

A mutant fitting these criteria was identified and subjected to further investigation, which revealed that it could not produce FIONA1. In non-mutant plants, this enzyme chemically modifies one of the components of the spliceosome, a small nuclear RNA known as U6. Parker et al found that there are two types of splice site – one more likely to interact with U6 and another that preferentially interacts with another small nuclear RNA, U5. When FIONA1 is inactive (such as in the mutant identified by Parker et al.), splice sites that tend to strongly interact with U5 are selected. However, when the enzyme is active, splice sites that tend to bind with the chemically modified U6 are used instead.

Further work by Parker et al. showed that these two types of splice sites (‘preferring’ either U5 or U6) are found in equal proportions in the genomes of many species, including humans. This suggests that Parker et al. have uncovered an essential feature of how genomes are organised and splicing is controlled.

Introduction

Split genes are a defining characteristic of eukaryotic genomes (Plaschka et al., 2019). During pre-mRNA transcription, intervening sequences (introns) are excised, and the flanking sequences (exons) are spliced together. In developmentally complex eukaryotes, such as humans or Arabidopsis, most protein-coding genes have introns, and the cis-elements controlling splicing are degenerate. Such sequence variation facilitates alternative splice site selection that, in turn, permits the regulation of mRNA expression and the production of functionally different protein isoforms (Lee and Rio, 2015; Nilsen and Graveley, 2010). Consistent with this, alternative splicing is the foremost genomic predictor of developmental complexity (Chen et al., 2014).

Pre-mRNA splicing is carried out by the spliceosome (Plaschka et al., 2019; Wilkinson et al., 2020). This large, dynamic molecular machine comprises more than 100 proteins and 5 uridylate-rich snRNAs (UsnRNAs). Splicing requires two sequential transesterification reactions. The first reaction, called branching, occurs when the 2’ hydroxyl of the conserved intron branchpoint adenosine performs a nucleophilic attack on the 5’ splice site (5’SS), resulting in a cleaved 5’ exon and a branched lariat-intron intermediate. The second reaction, exon ligation, occurs via nucleophilic attack of the 3’ hydroxyl of the 5’ exon on the 3’ splice site (3’SS). Typically, the 5’SS is first recognised by U1 snRNP, whilst U2 snRNP recognises the branchpoint sequence of pre-mRNA. The preassembled U4/U6.U5 tri-snRNP subsequently joins the spliceosome. The conserved U6 snRNA ACAGA sequence replaces U1 snRNP at the 5’SS and loop 1 of U5 snRNA binds 5’ exon sequences adjacent to the 5’SS. In humans, selection of the 5’SS occurs during this hand-off to U6 and U5 snRNAs, and this step is decoupled from formation of the active site, thus potentially allowing for plasticity of 5’SS selection (Charenton et al., 2019; Fica, 2020). Subsequently, U6 pairs with U2 snRNA and intramolecular U6 snRNA interactions facilitate the positioning of the catalytic metal ions to effect branching and exon ligation (Wilkinson et al., 2020).

U6 snRNA is the most highly conserved UsnRNA, reflecting its crucial roles at the active site of the spliceosome (Wilkinson et al., 2020). Different base modifications are found in each of the UsnRNAs, including U6 snRNA, but the role of these modifications is poorly understood (Morais et al., 2021). The essential ACAGA sequence of Saccharomyces cerevisiae U6 snRNA is unmodified. However, in other species including Schizosaccharomyces pombe (Gu et al., 1996), the plant Vicia faba (Kiss et al., 1987), and human (Shimba et al., 1995), the central adenosine in the corresponding sequence is modified by methylation at the N6 position: ACm6AGA. In S. cerevisiae, U6 snRNA ACAGA recognises the stringently conserved GUAUGU sequence at the 5’ end of introns, with the central adenosine making a Watson-Crick base pair with the almost invariant U at the +4 position of the 5’SS (5’SS U+4) (Neuvéglise et al., 2011; Wan et al., 2019). Conversely, in species with m6A-modified U6 snRNA, the 5’SS can be degenerate and the identity of the base at the +4 position varies but is usually enriched for A. Therefore, the pairing between the 5’SS and the U6 snRNA ACAGA box is unlikely to be driven primarily by canonical Watson-Crick base pairs in these species. The precise function of the U6 snRNA m6A modification is unknown.

In humans, the U6 snRNA ACAGA sequence is methylated by the conserved methyltransferase METTL16 (Aoyama et al., 2020; Pendleton et al., 2017; Warda et al., 2017). This modification depends upon a specific sequence and distinct structural features of U6 snRNA that are recognised by METTL16. Hairpin sequences that mimic these features of U6 snRNA are found within the 3’UTR of S-adenosylmethionine (SAM) synthetase MAT2A mRNA and are also methylated by METTL16 (Pendleton et al., 2017; Shima et al., 2017). SAM synthetase is the enzyme responsible for production of the methyl donor SAM, which is required for methylation reactions in the cell. Binding of METTL16 to MAT2A mRNA influences splicing and/or stability, regulating MAT2A expression and SAM levels (Pendleton et al., 2017; Shima et al., 2017). In Caenorhabditis elegans, the METTL16 orthologue, METT-10, methylates U6 snRNA and also influences SAM levels by targeting SAM synthetase (sams) genes (Mendel et al., 2021). METT-10 methylates the 3’SS of sams-3/4 intron 2, although in a different sequence and structural context to U6 snRNA (Mendel et al., 2021). In S. pombe, the METTL16 orthologue, MTL16, appears to target only U6 snRNA (Ishigami et al., 2021). S. pombe mutants defective in MTL16 function show less efficient splicing of some introns, resulting in increased levels of intron retention. The S. pombe introns sensitive to loss of MTL16 function are distinguished by having adenosine at the +4 position of the intron (5’SS A+4). However, the effect of 5’SS A+4 is partially suppressed in introns that have stronger predicted base pairing between U5 snRNA loop 1 and the 5’ exon (Ishigami et al., 2021).

Alternative splicing plays crucial roles in gene regulation, affecting diverse biological processes including the control of flowering in response to ambient temperature (Airoldi et al., 2015; Capovilla et al., 2017). Slight changes in ambient temperature can profoundly influence flowering time (Andrés and Coupland, 2012). Indeed, documented changes in the flowering times of many plant species have provided some of the best biological evidence of recent climate change (Fitter and Fitter, 2002). At cooler ambient temperatures, pre-mRNAs encoding repressors of Arabidopsis flowering, FLM (FLOWERING LOCUS M) and MAF2 (MADS AFFECTING FLOWERING 2), are efficiently spliced (Airoldi et al., 2015; Balasubramanian et al., 2006; Lee et al., 2013; Lutz et al., 2015; Posé et al., 2013; Scortecci et al., 2001). As a result, FLM and MAF2 proteins are produced at cooler temperatures and form higher-order protein complexes with other MADS box factors, such as MAF3 (MADS AFFECTING FLOWERING 3), SVP (SHORT VEGETATIVE PHASE), and FLC (FLOWERING LOCUS C), to directly repress the expression of the genes FT (FLOWERING LOCUS T) and SOC1 (SUPPRESSOR OF OVEREXPRESSION OF CO 1), which promote flowering (Gu et al., 2013). At elevated ambient temperatures, the splicing of MAF2 and FLM introns is adjusted, in different ways, effecting increased levels of non-productive transcripts (Airoldi et al., 2015; Balasubramanian et al., 2006; Lee et al., 2013; Lutz et al., 2015; Posé et al., 2013; Scortecci et al., 2001). Consequently, the abundance of active MAF2 and FLM proteins is compromised at elevated temperatures; repression of genes promoting flowering is relieved, and flowering is enabled (Airoldi et al., 2015; Capovilla et al., 2017; Posé et al., 2013; Rosloski et al., 2013). In the case of MAF2, this temperature-responsive splicing is characterised by a progressive increase in retention of intron 3 as ambient temperature increases (Airoldi et al., 2015). The thermosensory mechanism that underpins the temperature-responsive alternative splicing of MAF2 and FLM is unknown.

We conducted a two-step mutant screen for factors required for the efficient splicing of MAF2 pre-mRNA intron 3 at cooler temperatures. This screen identified an early flowering mutant disrupting the gene encoding the Arabidopsis METTL16 orthologue, FIONA1 (FIO1; Kim et al., 2008). We show that FIO1 is required for m6A modification of U6 snRNA. We detect widespread changes in pre-mRNA splicing in fio1 mutants that can be explained by the identity of the base at the 5’SS +4 position of affected introns and by cooperative roles for U5 and U6 snRNA in 5’SS selection. We also reveal that U6 snRNA interactions at 5’SSs affect 3’SS choice. Analysis of other annotated genomes reveal the existence of two major classes of 5’SS. Our findings suggest cooperative and compensatory roles of U5 and U6 snRNA may contribute to 5’SS selection in a range of eukaryotes.

Results

Identification of FIO1 in a two-step screen for early flowering mutants with increased retention of MAF2 intron 3

To identify factors responsible for promoting efficient splicing of MAF2 intron 3 at low ambient temperature, we performed a two-step genetic screen using ethyl methanesulfonate (EMS) as a mutagen (Figure 1A). In the first step, we screened 15,000 EMS lines for early flowering Arabidopsis mutants at 16°C. In the second step, the earliest flowering 100 individuals were re-screened for enhanced MAF2 intron 3 retention at 16°C, using RT-PCR. Two independent mutants (EMS-129 and EMS-213) showed early flowering and increased levels of MAF2 intron 3 retention at 16°C. We focus here on EMS-129 (Figure 1—figure supplement 1A). The causal mutation for the early flowering phenotype of EMS-129 was mapped by back-crossing to the M0 parental line to generate a segregating population (Figure 1—figure supplement 1B). Early flowering plants and aphenotypic sisters were grouped into separate pools for genomic DNA sequencing. EMS-induced G to A transitions were identified, and allele fractions were compared between the two pools (Javorka et al., 2019). A total of 19 homozygous G to A transitions in a 2.6 Mb region on chromosome 2 were associated with the early flowering phenotype (Figure 1B). Of these, only the SNP at position 9,041,454 of chromosome 2, which disrupts the 5’SS of AT2G21070 intron 2, was predicted to have a major impact on gene expression. An EMS mutation in AT2G21070 has previously been described and named fio1-1 (Kim et al., 2008). Crosses between EMS-129 and fio1-1 confirmed allelism because 100% of F1 progeny from EMS-129 lines crossed to fio1-1 flowered early (35 plants) compared to 0% of F1 progeny from EMS-129 lines crossed to Col-0 (15 plants). We isolated an independent transfer-DNA insertion in AT2G21070 (Alonso et al., 2003), which we refer to as fio1-3. Henceforth, we refer to EMS-129 as fio1-4. We summarise the fio1-1, fio1-3, and fio1-4 alleles in Figure 1C. fio1-1 and fio1-3 show increased levels of MAF2 intron 3 retention at low temperature (Figure 1D) and like maf2 mutants, flower early (Figure 1E–F). fio1 alleles share additional visible phenotypes, including reduced apical dominance and stature (Figure 1F). FIO1 encodes the Arabidopsis orthologue of the human methyltransferase, METTL16 (Kim et al., 2008; Pendleton et al., 2017).

Figure 1 with 1 supplement see all
Download asset Open asset
Loss of FIO1 causes early flowering and reduced splicing of pre-mRNA encoding the floral repressor MAF2.

(A) Schematic showing the format of the two-step mutant screen. (B) Scatter plot showing allele fractions of ethyl methanesulfonate (EMS)-induced G to A transitions in pooled phenotypically normal plants (blue) and early flowering sisters (orange). Dark orange diamonds show SNPs predicted to have a significant impact on the functional expression of a protein-coding gene (nonsense mutations and splice site mutations). The green line shows the test statistic for the G-test between the allele fractions found in early flowering and normal plants, which has been smoothed using a tri-cube kernel with a window size of two megabases (Mb). The 2.6 Mb mapping interval containing FIO1 is highlighted in grey. (C) Gene track showing the three fio1 mutant alleles used in this study. fio1-1 is an EMS mutant with a G→A transition at the –1 position of the 3’ splice site (3’SS) in intron 2 of FIO1 (Kim et al., 2008). This causes activation of a cryptic 3’SS 15 nt downstream, and the loss of 5 aa of sequence from the FIO1 open reading frame (shown in orange). fio1-3 is a T-DNA insertion mutant (SALK_084201) in the first exon of the FIO1, disrupting the gene (region downstream of insertion shown in light blue). fio1-4 is an EMS mutant with a G→A transition at the +1 position of the 5’ splice site (5’SS) in intron 2 of FIO1. This causes activation of a cryptic 5’SS 69 nt upstream, and the loss of 23 aa of sequence from the FIO1 open reading frame (shown in orange). (D) Changes in splicing efficiency determined by Reverse transcription-quantitative PCR (RT-qPCR) visualised as a regression scatterplot showing the change in spliced to retained ratio of MAF2 intron 3 in fio1-1 and fio1-3 at a range of temperatures. Shaded regions show bootstrapped 95% CI for regression lines. (E) Boxplot showing the change in flowering time (days to flowering) observed in the fio1-1, fio1-3, and maf2 mutants at a range of temperatures. (F) Photographs showing the early flowering phenotypes of fio1-1, fio1-3, and fio1-4 mutants.

Figure 1—source data 1

Ethyl methanesulfonate (EMS) mutations identified in early flowering and MAF2 splicing screen.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig1-data1-v2.xlsx
Figure 1—source data 2

Sanger sequencing products for FIO1 cDNAs in fio1-1 and fio1-4 mutant.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig1-data2-v2.txt
Figure 1—source data 3

Sanger sequencing product alignments for FIO1 cDNAs in fio1-1 and fio1-4 mutant.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig1-data3-v2.txt
Figure 1—source data 4

MAF2 intron 3 splicing quantitative PCR (qPCR) data for Col-0, fio1-1I and fio1-3 mutants.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig1-data4-v2.xlsx
Figure 1—source data 5

Flowering time data for fio1-1, fio1-3, and maf2 mutants.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig1-data5-v2.xlsx
Figure 1—source data 6

RT-PCR screening of MAF2 intron 3 splicing in early flowering mutants.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig1-data6-v2.zip

FIO1-dependent methylation of poly(A)+ RNA is rare or absent

To reveal which RNAs were methylated by FIO1, we first used two orthogonal approaches to determine the impact of FIO1 on poly(A)+mRNA m6A modification: liquid chromatography tandem mass spectrometry (LC-MS/MS) and nanopore direct RNA sequencing (DRS). As a positive control for these experiments, we included a hypomorphic fip37-4 allele defective in the Arabidopsis orthologue of the METTL3 m6A writer complex component WTAP (Zhong et al., 2008).

LC-MS/MS analysis (Figure 2A) revealed an 81.8% decrease in m6A levels in fip37-4 compared to Col-0 (t test p=2.2 × 10−6). In contrast, a 6.7% decrease in m6A levels was observed in poly(A)+RNA purified from fio1-1 (t test p=0.40). A similarly modest decrease in mRNA m6A levels has recently been reported for other fio1 alleles (Wang et al., 2022).

Figure 2 with 3 supplements see all
Download asset Open asset
FIO1-dependent m6A modification of poly(A)+mRNA is rare or absent, but FIO1 is required for U6 snRNA methylation.

(A) Liquid chromatography tandem mass spectrometry (LC-MS/MS) analysis. Boxplots showing that the ratio of m6A to A in poly(A)+mRNA is only modestly reduced in fio1-1 mutants compared to Col-0. In contrast, m6A levels are significantly reduced in the fip37-4 mutant. (B) The intersection of m6A modification sites detected by nanopore direct RNA sequencing of poly(A)+RNA purified from Col-0, fip37-4, and fio1-1, visualised using an upset plot. All sites shown have significant differences in modification level in a three-way comparison between fip37-4, fio1-1, and Col-0. Bars show size of intersections between sites which are significant in each two-way comparison. Total intersection sizes displayed in black above each bar. A comparison to previously identified m6A sites using the orthogonal technique, miCLIP is included: orange and blue bar fractions show the number of sites within each set intersection that have or do not have an miCLIP peak (Parker et al., 2020) within 5 nt, respectively. Percentage of intersections with miCLIP support is displayed in orange above each bar. A small number of sites are significant in the three-way comparison, but in neither two-way comparison (far left bar). (C–D) Detection of RNAs immunoprecipitated from Col-0 and fio1 mutant alleles with anti-m6A antibodies using RT-qPCR analysis. The data are presented as strip-plots with mean and 95% CIs, showing the enrichment of U6 and U2 snRNAs over input using (C) Synaptic systems #202 003 anti-m6A antibody and RNA purified from Col-0 and fio1-1, and (D) Millipore ABE572 anti-m6A antibody and RNA purified from Col-0, fio1-1, fio1-3, and fio1-4. Y axes show −ΔCt (m6A-IP — input) corrected for input dilution factor. Strip-plots show mean values for three or four independent RT-qPCR amplifications on each biological replicate immunopurification experiment.

Figure 2—source data 1

LC:MS/MS data for Col-0, fio1-1, and fip37-4 poly(A)+RNA.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig2-data1-v2.xlsx
Figure 2—source data 2

Differential modification sites detected from a three-way omparison of Col-0, fip37-4, and fio1-1 mutants using nanopore direct RNA sequencing (DRS) data.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig2-data2-v2.xlsx
Figure 2—source data 3

m6A-IP quatitative PCR (qPCR) data for U6 and U2 snRNAs in Col-0, fio1-1, fio1-3, and fio1-4 mutants.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig2-data3-v2.xlsx
Figure 2—source data 4

Differential poly(A) site usage results for fip37-4 and fio1-1 identified using nanopore direct RNA sequencing (DRS) data.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig2-data4-v2.xlsx

We previously used nanopore DRS to map m6A sites dependent on the Arabidopsis METTL3-like writer complex component VIRILIZER (VIR), revealing m6A enriched in a DRm6ACH consensus in the 3’ terminal exon of protein coding mRNAs (Parker et al., 2020). We used a similar nanopore DRS experiment to map FIO1-dependent m6A. We sequenced poly(A)+RNA purified from four biological replicates each of wild-type (Col-0), fio1-1 and fip37-4, resulting in a total of 22.7 million mapped reads. The corresponding sequencing statistics are detailed in Supplementary file 1. We used the software tool Yanocomp to map differences in mRNA modifications (Parker et al., 2021a). Applying this approach, we identified 37,861 positions that had significantly different modification rates in a three-way comparison between Col-0, fip37-4, and fio1-1 (Figure 2B). Of these, 97.9% had significant changes in modification rate in a pairwise comparison between fip37-4 and Col-0. In contrast, only 7.6% had altered modification rates in fio1-1. Of these, 85.8% also had altered modification rates in fip37-4 (Figure 2B), with larger effect sizes (Figure 2—figure supplement 1A), indicating that they are METTL3-like writer complex-dependent m6A sites whose modification rate is indirectly affected by loss of FIO1. The FIP37-dependent modification sites, including those with small effect-size changes in fio1-1, were found in a DRACH consensus in 3’UTR regions (Figure 2—figure supplement 1B–C), consistent with established features of m6A modifications deposited by the Arabidopsis METTL3-like writer complex (Parker et al., 2020).

We used the antibody-based technique miCLIP to perform orthogonal validation of predicted modification sites (Parker et al., 2020): FIP37-dependent m6A sites were well supported, with 52.8% less than 5 nt from an miCLIP peak (Figure 2B). In contrast, of the 408 sites discovered only in fio1-1, just 21.3% (87) were less than 5 nt from an miCLIP peak, indicating that the majority are likely to be false positives. The 87 positions with miCLIP support were found in a DRACH consensus in 3’UTRs, suggesting that they are false negative FIP37-dependent m6A sites rather than genuine FIO1-dependent sites (Figure 2—figure supplement 1D–E).

We did not find FIO1-dependent methylation changes in transcripts of the four Arabidopsis homologues of SAM-synthetase (Figure 2—figure supplement 2A–D). Consequently, the METTL16-dependent regulation of SAM homeostasis identified in metazoans (Mendel et al., 2021; Pendleton et al., 2017; Shima et al., 2017) appears not to be conserved in Arabidopsis. Consistent with previous evidence that m6A in 3’UTRs affects cleavage and polyadenylation (Parker et al., 2020), we identified 1104 genes with altered poly(A) site choice in fip37-4, compared to only 49 in fio1-1 (Figure 2—figure supplement 1F). Overall, these findings indicate that FIO1-dependent m6A sites in poly(A)+mRNA are rare or absent.

m6A modification of U6 snRNA depends upon FIO1

Since FIO1 orthologues methylate U6 snRNA, we asked if FIO1 was required to modify Arabidopsis U6 snRNA. We performed two experiments using two independent anti-m6A antibodies to immunopurify methylated RNAs from Col-0 and fio1 alleles. For control, we used U2 snRNA, which is m6A methylated in humans, but not by METTL16 (Chen et al., 2020). Using RT-qPCR, we could detect equivalent levels of U6 snRNA in the input RNA purified from different genotypes, suggesting that the abundance of U6 snRNA is unaffected by loss of FIO1 function (Figure 2—figure supplement 3A–B). We detected enrichment of U6 and U2 snRNAs in RNA immunopurified with anti-m6A antibodies from Col-0 (Figure 2C–D). The enrichment of U2 snRNA in these experiments was unaffected by loss of FIO1 function. In contrast, we identified significant depletion of U6 snRNA in the anti-m6A immunopurified RNA from fio1-1, fio1-3, and fio1-4 alleles (Figure 2C–D). These data are consistent with recent reports (Wang et al., 2022; Xu et al., 2022) indicating that Arabidopsis U6 snRNA is m6A-modified at the conserved position of the ACm6AGA box and that this modification requires active FIO1.

Widespread disruption of pre-mRNA splicing in fio1 mutants

Having found that FIO1 is required for U6 snRNA m6A modification, we examined changes in gene expression and pre-mRNA splicing in fio1 mutants. Nanopore DRS is insightful for mapping the complexity of RNA processing and modification, but throughput currently limits the statistical power to detect splicing changes, and basecalling errors complicate the alignment of exon/intron boundaries (Parker et al., 2021b). Consequently, we used Illumina RNA-seq of poly(A)+RNA to analyse gene expression and splicing. Since FIO1 affects the splicing of MAF2, which is sensitive to changes in temperature, we included plants grown at 20°C and shifted to either 4, 12, or 28°C for 4 hr prior to harvesting and poly(A)+RNA purification. We sequenced six biological replicates each of wild-type Col-0 and fio1-3, generating a minimum of 46 million paired end reads, 150 bp in length, per replicate. On average, 97.9% of read pairs were mappable per replicate, resulting in a total of 3.6 billion mapped read pairs. A summary of the sequencing read statistics is given in Supplementary file 1. The RNA-seq data clearly reveal disruption of FIO1 gene expression in fio1-3 (Figure 3—figure supplement 1A).

To detect cryptic splice sites that might be activated in fio1 mutants, we built a condition-specific reference transcriptome derived from the Col-0/fio1-3 Illumina RNA-seq and Col-0/fio1-1 nanopore DRS data using the software tool Stringtie2 (Kovaka et al., 2019). We quantified the expression of these transcripts using Salmon (Patro et al., 2017), then used SUPPA2 to calculate event-level percentage changes in splicing, which also classifies different types of splicing event (Trincado et al., 2018). These percent spliced indices (PSIs) were used to fit linear models for each splicing event to identify changes in splicing dependent on temperature, genotype, and temperature×genotype interactions. Analysis of the Col-0 temperature-shift data served as a control. Consistent with previous studies (Calixto et al., 2018), we found that intron retention is the predominant class of alternative splicing event detected when Arabidopsis is subjected to different temperatures (Figure 3A). In contrast, when we repeated this analysis to classify alternative splicing events that differ between fio1-3 and Col-0, we found that a larger proportion of alternative splicing events were classified as alternative 5’SS usage – 34.4%, compared to only 18.6% of temperature-dependent events (Figure 3B, Figure 3—figure supplement 1B). In addition, we detected changes in the PSI of retained introns, exon skipping, and alternative 3’SS selection (Figure 3B, Figure 3—figure supplement 1B). There was a significant overlap between the alternative splicing events that were sensitive to loss of FIO1, and those that were sensitive to temperature (hypergeometric-test p<1 × 10−16). However, in 64.2% of fio1-sensitive events, loss of FIO1 did not alter splicing responses to temperature (Figure 3B). Of the remaining 2505 splicing events that did have altered temperature sensitivity in the absence of FIO1, 38.4% were alternative 5’SSs, and of these, 69.9% had greater sensitivity to loss of FIO1 at 28°C than at 4°C. This suggests that canonical 5’SS selection at elevated temperature requires FIO1 (Figure 3—figure supplement 1C).

Figure 3 with 2 supplements see all
Download asset Open asset
Splicing events sensitive to temperature and loss of FIO1.

(A–B) Analysis of Illumina RNA-seq data presented as bar plots showing the proportion of splicing events of each class, as labelled by SUPPA, which have significantly different usage (false discovery rate [FDR] <0.05) at either (A) varying temperatures or (B) in fio1-3. In (B), events for which the response to temperature changes in fio1-3 are shown in orange. (C) Gene track of Illumina RNA-seq reads showing the change in retention of MAF2 intron 3 in fio1-3, at 20°C. Expression is normalised by the read coverage at the −1 position of the 5’ splice site (5’SS). (D) Boxplot of Illumina RNA-seq analysis showing the change in retention of MAF2 intron 3 at varying temperatures and in fio1-3.

Figure 3—source data 1

Differential gene expression analysis results from Illumina RNA-seq experiment on Col-0 and fio1-3 mutants at four temperatures.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig3-data1-v2.xlsx
Figure 3—source data 2

Differential splicing analysis results from Illumina RNA-seq experiment on Col-0 and fio1-3 mutants at four temperatures.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig3-data2-v2.xlsx

Analysis of the RNA-seq data confirmed the increased retention of MAF2 intron 3 in fio1-3, consistent with the results of our two-step mutant screen (Figure 3C). Loss of FIO1 decreased the splicing efficiency of MAF2 intron 3 by approximately equivalent amounts at all temperatures (Figure 3D), implying that FIO1 is not required to generate MAF2 intron 3 temperature sensitivity.

We detected changes in gene expression consistent with the early flowering phenotype of fio1 mutant alleles (Figure 3—figure supplement 2A–G). For example, FT and SOC1 mRNA levels were increased in fio1-3 (Figure 3—figure supplement 2A–B). In contrast, the mRNA levels of the floral repressors FLM, MAF2, MAF3, MAF4, MAF5, and FLC were reduced (Figure 3—figure supplement 2C–H). In the case of FLC, both sense and antisense transcript levels were reduced in fio1-3 (Figure 3—figure supplement 2H–I), but there were no detectable changes in splicing patterns or in the alternative polyadenylation of the antisense transcripts (Figure 3—figure supplement 2J). In these experimental conditions, loss of FIO1 did not affect RNA-level expression or splicing of either CO or SVP (Figure 3—figure supplement 2K–L). In contrast, fio1-3 mutants exhibited defects in the splicing of pre-mRNA encoding MAF2, MAF3, FLM, and other genes that influence flowering time, as detailed further below.

Overall, we conclude that the predominant molecular phenotype resulting from loss of FIO1 function is a major disruption to patterns of splicing in a manner that is mostly independent of temperature. To understand the basis of these splicing differences, we analysed each of these splicing classes separately.

Alternative selection of 5’SSs in fio1-3 can be explained by U6 and U5 snRNA target sequences

We identified 2369 changes in 5’SS choice caused by loss of FIO1 function. Alternative 5’SSs were almost equally likely to be selected upstream or downstream, with many examples of 5’SS shifts of exactly −4 nt,+4 nt, and +5 nt (Figure 4—figure supplement 1A). We asked if differences in cis-element features could account for FIO1-dependent 5’SS selection. Comparing 5’SSs that exhibited reduced selection in fio1-3 with their corresponding alternative 5’SSs, which were more frequently selected in fio1-3, we found a significant difference in base composition at the −2 to +5 positions (G-test p<1 × 10−16). Specifically, we identified a //GURAG motif (R=A or G) at 5’SSs sensitive to the loss of FIO1 function (Figure 4A). This motif appeared more commonly in fio1-sensitive 5’SSs than in the full set of 5’SSs observed in the RNA-seq dataset (Figure 4—figure supplement 1B) and is consistent with recognition by the U6 snRNA ACAGA box (Kandels-Lewis and Séraphin, 1993; Lesser and Guthrie, 1993; Sawa and Abelson, 1992). In contrast, the alternative 5’SSs selected more frequently in fio1-3 were characterised by an AG//GU motif (Figure 4B). This motif is consistent with U5 snRNA loop 1 recognition of the upstream exon sequences (Galej et al., 2016; Newman and Norman, 1992). There was no significant difference between the positional base frequencies for 5’SSs that were preferred at lower and elevated temperatures in Col-0 (G-test p=0.28; Figure 4—figure supplement 1C–D), demonstrating that altered 5’SS sequence preference is specific to the fio1-3 mutant and not a general feature of alternative splicing.

Figure 4 with 3 supplements see all
Download asset Open asset
Effect of fio1-3 on alternative 5’ splice sites.

(A–B) Sequence logos and heatmap showing the distribution of U5 snRNA and U6 snRNA interacting sequence classes for 5’ splice sites (5’SSs) which (A) are sensitive to loss of FIO1 function or (B) have increased usage in fio1-3 based on the analysis of Illumina RNA-seq data. Motifs are shown for the −3 to +5 positions of the 5’SS. U5 classes are based upon the distance of the −2 to −1 positions of the 5’SS from the consensus motif AG. U6 classes are based upon the distance of the +3 to +5 positions of the 5’SS from the consensus motif RAG. (C) Gene track of Illumina RNA-seq reads showing alternative 5’SS usage at AtSAR1 intron 21 in fio1-3, at 20°C. Expression is normalised by the read coverage at the −1 position of the 5’SS. (D) Illumina RNA-seq analysis visualised with a boxplot showing the change in usage of the cryptic alternative 5’SS (Alt 5’SS 2) in AtSAR1 intron 21 at varying temperatures in Col-0 and fio1-3. (E) Gene track showing alternative 5’SS usage at AtSAR1 intron 21 in fio1-1, identified using nanopore direct RNA sequencing (DRS) read alignments. Alignments have been subsampled to a maximum of 50 per condition. (F) Contingency table showing the relationship between the nucleotide at the +4 position, and the direction of change in 5’SS usage in fio1-3, for pairs of alternative 5’SSs with significantly altered usage in fio1-3 analysed in Illumina RNA-seq data. (G) Boxplot showing effect sizes of pairs of alternative 5’SSs with significantly altered usage in fio1-3, separated by +4 position bases (A→U indicates that 5’SS with reduced usage has A+4, 5’SS with increased usage has U+4). (H) Boxplot showing effect sizes of pairs of alternative 5’SSs with significantly altered usage in fio1-3, separated by U5 classification.

Figure 4—source data 1

Differential productive transcription/Nonsense mediated RNA decay (NMD) analysis results from Illumina RNA-seq experiment on Col-0 and fio1-3 mutants at four temperatures.

https://cdn.elifesciences.org/articles/78808/elife-78808-fig4-data1-v2.xlsx

The widespread changes in 5’SS selection are evident at individual loci. For example, at AtSAR1 (AT1G33410), loss of FIO1 function, at 20°C, results in a 52.2% reduction in the use of the normally near constitutive 5’SS in intron 21, UC//GUGAG, with a reciprocal increase in the use of a cryptic 5’SS UG//GUAUU 26 nt downstream (Figure 4C and D). At elevated temperatures, the selection of this cryptic 5’SS becomes increasingly preferred (Figure 4D). The change in usage of this 5’SS is confirmed in the fio1-1 allele using orthogonal nanopore DRS (Figure 4E). We could also identify cryptic alternative 5’SSs in the second intron of MAF2 (Figure 4—figure supplement 2A–B), and the third exon of another floral repressor, FLM, used in fio1-3 (Figure 4—figure supplement 2C–D). The overall effect of these (and other) splicing changes is to reduce the fraction of productive AtSAR1, MAF2, and FLM transcripts in fio1-3 (Figure 4—figure supplement 2E–G). Finally, at the gene encoding the METTL3-like writer complex component MTB (the orthologue of human METTL14), loss of FIO1 function resulted in a 40.4% increase in the use of a cryptic 5’SS in intron 4 that introduces a premature termination codon into the MTB open reading frame (Figure 4—figure supplement 2H–I). Consequently, loss of FIO1 may have indirect effects on m6A deposition by the METTL3-like writer complex.

Remarkably, the presence or absence of an A at the +4 position (A+4) correctly separates 78.6% of the 5’SSs exhibiting decreased and increased usage in fio1-3 (Figure 4F). In humans, where pairing of the 5’SS to U6 snRNA occurs before activation of the spliceosome, the 5’SS A+4 faces the m6A of the U6 snRNA ACm6AGA box in the B complex before docking of the 5’SS in the active site (Bertram et al., 2017). Of the 5’SSs with increased usage in fio1-3, 48.2% have U+4, which could make a Watson–Crick base pair with the corresponding unmethylated residue of U6 snRNA. In total, 61.8% of 5’SS changes in fio1-3 is associated with a switch from A+4 to B+4 (B=C, G or U), of which 58.8% are A→U+4 (Figure 4—figure supplement 3A). In comparison, only 3.8% of alternative 5’SS pairs are reciprocal B→A+4 switches, indicating that this shift is strongly directional. A further 8.0% of alternative 5’SS pairs are S→U+4 (S=C or G), suggesting that a Watson–Crick A–U base-pair is favoured when U6 snRNA is not m6-modified. Surprisingly, 22.3% of alternative 5’SS pairs have the same base at the +4 position (Figure 4—figure supplement 3A). However, of these 5’SS pairs, the majority are associated with a G→H+5 (H=A, C or U) and/or H→G–1 switch that weakens interactions with the U6 snRNA ACAGA box and strengthens U5 snRNA loop 1 interactions (Figure 4—figure supplement 3B).

We next examined how the effect size (absolute ΔPSI) of splicing changes correlated with the base at the +4 position of the 5’SS. The largest effect sizes were associated with A→U+4 (Figure 4G). In contrast, alternative 5’SS pairs with an A→A+4 shift had smaller effect sizes. We found that fio1-3-sensitive 5’SSs with 5’SS G+5 had larger effect sizes but that G+5 at the alternative 5’SS had less effect, suggesting that G+5 is only deleterious in fio1-3 when in combination with A+4 (Figure 4—figure supplement 3C). Finally, we found that fio1-3-sensitive 5’SSs with AG//GU motifs had smaller effect sizes, indicating that favourable interactions with U5 snRNA loop 1 can suppress the effect of unfavourable U6 snRNA interactions in fio1-3 (Figure 4H).

In summary, these analyses demonstrate widespread change in 5’SS selection in fio1 mutants. The 5’SSs with a strong match to the U6 snRNA ACAGA box and/or an A+4 are most sensitive to loss of FIO1. This sensitivity can be suppressed by a strong match in the 5’ exon to U5 snRNA loop 1. Alternative 5’SSs that are used more in fio1 have U+4, as well as 5’ exon sequence features that favour recognition by U5 snRNA loop 1.

FIO1-dependent changes in intron retention and exon skipping can be explained by U6 and U5 snRNA target sequences

In addition to altered 5’SS selection, we detected many instances of intron retention and exon skipping in fio1-3. We therefore asked if these FIO1-sensitive splicing phenotypes were associated with specific sequence motifs.

We identified 2576 introns with altered levels of retention in fio1-3, of which 55.8% had increased retention, and 44.2% had decreased retention (i.e. more splicing). Analysis of 5’SS sequences at introns with increased retention indicates that 76.9% had A+4, as well as a weaker interaction potential with U5 snRNA loop 1 (Figure 5A). For example, at WNK1 (AT3G04910), we detected increased retention of intron 5 (CG//GUGAG) in fio1-3 (Figure 5B–C) and fio1-1 (Figure 5D) using Illumina RNA-seq and nanopore DRS analysis, respectively. This indicates that these introns are normally recognised by strong U6 snRNA interactions and are less efficiently spliced in the absence of FIO1-dependent U6 snRNA m6A modification. The remaining introns with significantly altered retention are more efficiently spliced in fio1-3. These introns tend to have stronger matches to U5 snRNA loop 1 in the 5’ exon, and only 34.7% have A+4, whilst 44.3% have U+4 (Figure 5A). This suggests that loss of m6A from U6 snRNA actually increases the splicing efficiency of introns with U at the +4 position of the 5’SS.

Figure 5 with 1 supplement see all
Download asset Open asset
Effect of fio1-3 on retained introns and exon skipping events.

(A) Sequence logos and heatmaps showing the distribution of U5 snRNA and U6 snRNA interacting sequence classes for 5’ splice sites (5’SSs) which have increased (left) and decreased (right) retention in fio1-3 based on Illumina RNA-seq data analysis. Motifs are shown for the −3 to +5 positions of the 5’SS. U5 classes are based upon the distance of the −2 to −1 positions of the 5’SS from the consensus motif AG. U6 classes are based upon the distance of the +3 to +5 positions of the 5’SS from the consensus motif RAG. (B) Gene track of Illumina RNA-seq reads showing intron retention at WNK1 intron 5 in fio1-3, at 20°C. Expression is normalised by the read coverage at the +1 position of the 3’ splice site (3’SS). (C) Boxplot of Illumina RNA-seq data analysis showing the change in intron retention of WNK1 intron 5 at varying temperatures, in Col-0 and fio1-3. (D) Gene track showing intron retention at WNK1 intron 5 in fio1-1, identified using nanopore direct RNA sequencing (DRS) read alignments. Alignments have been subsampled to a maximum of 50 per condition. (E–F) Sequence logos for 5’SSs at introns upstream (left) and downstream (right) of exons with (E) increased skipping or (F) increased retention in fio1-3 based on Illumina RNA-seq data analysis.

A common form of alternative splicing involves the excision of an exon and flanking introns in a splicing event called exon skipping. These events involve two 5’SSs: those at the upstream intron and those at the downstream intron (i.e. at the 3’ end of the skipped exon; Figure 5E–F). We identified 442 exons with significantly different levels of skipping in fio1-3. Of these, 53.6% have increased levels of inclusion and 46.4% have increased levels of skipping.

In cases where exon skipping increased in fio1-3, more of the 5’SSs at downstream introns had A+4 compared to the 5’SSs at upstream introns. Conversely, more of the 5’SSs at upstream introns had strong U5 snRNA loop 1 interacting sequences (Figure 5E, Figure 5—figure supplement 1A). This is consistent with a relative weakening of the recognition of the 5’SS at the downstream intron in fio1-3. For example, at the gene encoding the floral repressor MAF3 (AT5G65060), there is an increase in skipping of exon 2 in fio1-3 (Figure 5—figure supplement 1B–C). The 5’SS at the 3’ end of this exon is UA//GUAAG, whereas the upstream 5’SS (AA//GUAAG) is a stronger match to U5 snRNA loop 1.

In cases where exon inclusion increased in fio1-3, we found that the majority of 5’SSs at upstream introns had A+4, whereas a plurality of 5’SSs at downstream introns had U+4 (Figure 5F, Figure 5—figure supplement 1A). For example, at PTB1 (AT3G01150), there is an increase in inclusion of exon 3 in fio1-3 (Figure 5—figure supplement 1D–E). The 5’SS at the 3’ end of this exon is AG//GUGUC, whereas the upstream 5’SS is UG//GUGAG. Although both the upstream and downstream 5’SSs are used when the exon is retained, it is possible that the relative strengthening of recognition of the downstream 5’SS in fio1-3 improves exon definition.

In summary, we can identify and characterise changes in intron retention and exon skipping sensitive to loss of FIO1 function. Although the outcome of these splicing events is different from alternative 5’SS selection, they are associated with the same changes in 5’SS sequence as those associated with alternative 5’SS selection.

Alternative 3’SS usage in fio1-3 can be explained by U6 snRNA-dependent interactions between 5’ and 3’SSs

We observed 1484 instances where 3’SS selection was altered in fio1-3. In some cases, these alternative 3’SSs were linked with altered 5’SS choice or intron retention, but this accounted for a relatively small proportion of events (Figure 6—figure supplement 1A). Alternative 3’SS selection was equally likely to switch in an upstream or downstream direction in fio1-3 (Figure 6A). There was a strong enrichment for very local switching of 3’SSs, with 37.9% of alternative 3’SSs occurring within 6 nt of the fio1-3-sensitive 3’SS, and 18.9% of examples occurring at exactly 3 nt upstream or downstream. These examples correspond to NAGNAG-like acceptors, which have previously been characterised in multiple species including human and Arabidopsis (Bradley et al., 2012; Hiller et al., 2004; Schindler et al., 2008).

Figure 6 with 4 supplements see all
Download asset Open asset
Effect of fio1-3 on alternative 3’ splice site (3’SS) usage.

(A) Histogram showing the distance between alternative 3’SS pairs with significantly different usage in fio1-3 revealed by Illumina RNA-seq data analysis. Negative distances represent shifts toward greater usage of upstream 3’SSs, whilst positive distances represent shifts toward greater usage of downstream 3’SSs. (B–C) Sequence logos for 5’ splice sites (5’SSs; left), upstream 3’SSs (middle), and downstream 3’SSs (right) at pairs of alternative 3’SSs with increased (B) upstream or (C) downstream usage in fio1-3 revealed by Illumina RNA-seq data analysis. 5’SS logos are for −3 to +5 positions, and 3’SS logos are for −5 to +2 positions. (D) Gene track of Illumina RNA-seq reads showing alternative 3’SS usage at LHY intron 5 in fio1-3, at 20°C. Expression is normalised by the read coverage at the −1 position of the 5’SS. (E) Boxplot of Illumina RNA-seq data analysis showing the change in usage of the upstream alternative 5’SS (Alt 5’SS 2) in LHY intron 5 at varying temperatures in Col-0 and in fio1-3. (F) Gene track showing intron retention at LHY intron 5 in fio1-1, identified using nanopore direct RNA sequencing (DRS) read alignments. Alignments have been subsampled to a maximum of 50 per condition. (G) Boxplot of Illumina RNA-seq data analysis showing the change in usage of downstream 3’SSs in alternative 3’SS pairs with different 5’SS +4 bases, separated by whether the base at the −3 position of the two alternative 3’SSs is the same (e.g. CAG\\CAG\\) or different (e.g. UAG\\CAG\\).

To examine the 5’SSs associated with alternative 3’SSs used in fio1-3, we separated examples with increased upstream and downstream 3’SS usage and performed motif analysis. At introns with a relative increase in upstream 3’SS usage in fio1-3, we found that 80.5% of the corresponding 5’SSs were characterised by A+4 (Figure 6B). For example, at LHY (AT1G01060), we identified an AA//GUAAG 5’SS and a UAG\\CAG\\ alternative 3’SS pair in intron 7 (Figure 6D). In fio1-3, at 20°C, there is a shift in favour of the upstream UAG\\ 3’SS (Figure 6E). This 3’SS switch is supported by orthogonal nanopore DRS analysis of the fio1-1 allele (Figure 6F). Conversely, when we analysed the features of introns where a relative increase in downstream 3’SS usage was detected in fio1-3, we found that only 37.0% of these 5’SSs had A+4, whereas 48.8% had U+4 (Figure 6C). For example, at MAF2 intron 4, we identified an AG//GUAUU 5’SS and a UAG\\ACAG\\ alternative 3’SS pair (Figure 6—figure supplement 1B). In fio1-3, at 20°C, there is a shift in favour of the downstream CAG\\ 3’SS (Figure 6—figure supplement 1C).

3’SS choice involves scanning downstream from the branchpoint to the first available 3’SS motif (Smith et al., 1993). However, competition with downstream 3’SSs can occur within a short range, such as in NAGNAG acceptors. Downstream 3’SSs in fio1-sensitive alternative 3’SS pairs were more likely than upstream 3’SSs to have a cytosine as the −3 position (Figure 6B–C). However, this appears to reflect differences in the background rate of C−3 upstream and downstream (Figure 6—figure supplement 1D), rather than a change in 3’SSs motif competitiveness in fio1-3 (Bradley et al., 2012; Smith et al., 1993). To analyse whether the −3 position contributes to changes in alternative 3’SS usage in fio1, we separated fio1-sensitive 3’SS pairs where the base at the −3 position was the same at both the upstream and downstream 3’SS, from examples which had different bases at the −3 position. We found that among both sets of 3’SS pairs, 5’SS A+4 was still associated with increased upstream usage in fio1-3, whereas U+4 was associated with increased downstream usage (Figure 6G). This demonstrates that changes in 3’SS usage in fio1-3 are caused by a change in the competitiveness of distal 3’SSs, irrespective of 3’SS motif.

These findings link selection of the 3’SS and 5’SS. When U6 snRNA recognition of the 5’SS is favoured by either an m6A:A+4 interaction in WT Col-0 or A:U+4 interaction in fio1-3, this increases the usage of distal 3’SSs. When the U6 snRNA/5’SS interaction is less favoured, then upstream 3’SSs are more likely to be used. We conclude that the interactions of U6 snRNA with the 5’SS can influence usage of competing 3’SSs.

Reanalysis of RNA-seq data from independent fio1 alleles confirms disruption to splicing

In contrast to our findings, three recently published studies of fio1 mutants failed to identify an impact on splicing (Wang et al., 2022; Xu et al., 2022; Sun et al., 2022). We reanalysed these published data to understand the basis for this difference. Two studies performed Illumina RNA-seq analysis (Wang et al., 2022; Sun et al., 2022) but were not well powered with only two replicates per condition. The Illumina RNA-seq data from Wang et al. were of poor quality, with low mapping rates and one unusable replicate due to PCR-bias (Figure 6—figure supplement 2A). Nevertheless, we were able to detect 384 alternative 5’SS events by using our condition-specific transcriptome assembly and performing differential splicing analysis with SUPPA2. These events were associated with a shift from 5’SSs with A+4 to alternatives with U+4 (Figure 6—figure supplement 2B). We reanalysed the Illumina RNA-Seq data from Sun et al. (two replicates per condition and 20–26 million reads per replicate) to identify 923 alternative 5’SS events in fio1-1 and 947 alternative 5’SS events in a CRISPR-induced mutation (fio1-5; Figure 6—figure supplement 3A–B). There were 675 alternative 5’SS events common to both alleles, and 556 (82.4%) of these were identified in our own analysis of fio1-3 (Figure 6—figure supplement 3C). A third study analysed gene expression changes using nanopore DRS (Xu et al., 2022). Using these data, we could confirm splicing changes observed in our own data, for example at AtSAR1 intron 21, WNK1 intron 5, and MTB intron 4 (Figure 6—figure supplement 4A–C). These changes were also visible in nanopore DRS data generated by Sun et al. (Figure 6—figure supplement 4D–F). We conclude that a combination of under-powered datasets and methodological choices in data analysis explain previous failures to link the loss of U6 snRNA methylation in fio1 mutants to detectable changes in splicing.

Sequences targeted by U5 and U6 snRNAs are anticorrelated in the 5’SSs of developmentally complex eukaryotes

Our results indicate that a strong match to U5 snRNA loop 1 in the 3’ end of the upstream exon offsets the effects of 5’SS A+4 unfavourability in fio1-3. We, therefore, reasoned that if U5 and U6 cooperate in 5’SS selection, then strong U5 snRNA loop 1 interactions may globally compensate weaker U6 snRNA ACAGA box interactions and vice versa. To test this hypothesis, we used all annotated Arabidopsis 5’SS sequences to generate position-specific scoring matrices (PSSMs) for the −2 to −1 positions corresponding to the U5 snRNA loop 1 interacting region, and the +3 to +5 positions corresponding to the U6 snRNA ACAGA box interacting region. We then used these PSSMs to score the U5 and U6 snRNA interaction log-likelihood of each individual 5’SS. 5’SSs with AG//GU motifs have high-scoring U5 PSSM scores, and those with //GURAG motifs have high-scoring U6 PSSM scores. This analysis revealed that U5 and U6 snRNA PSSM scores are indeed negatively correlated in Arabidopsis (Spearman’s ρ = −0.36, p<1 × 10−16). We found that 5’SSs lacking a //GURAG motif had significantly higher U5 PSSM scores than //GURAG 5’SSs (Figure 7A and B), whereas BH//GU 5’SSs had significantly higher U6 PSSM scores than AG//GU 5’SSs (Figure 7C and D). We found similar anticorrelations in U5 and U6 PSSM scores in other species, including C. elegans (ρ = −0.38, p<1 × 10−16; Figure 7—figure supplement 1A), Drosophila melanogaster (ρ = −0.30, p<1 × 10−16; Figure 7—figure supplement 1B), Danio rerio (ρ = −0.36, p<1 × 10−16; Figure 7—figure supplement 1C), and Homo sapiens (ρ = −0.17, p<1 × 10−16; Figure 7—figure supplement 1D). These findings indicate that there are two major classes of 5’SS in distinct eukaryotes: //GURAG and AG//GU. These two classes occur with approximately equal frequency in the metazoan genomes that we analysed (Figure 7—figure supplement 1A–D).

Figure 7 with 2 supplements see all
Download asset Open asset
Global analysis of U5 and U6 interaction strengths reveals anticorrelation.

(A) Sequence logos of annotated Arabidopsis splice sites showing base frequency probabilities at −3 to +5 positions for (above) 5’ splice sites (5’SSs) with //GURAG sequence and (below) all other 5’SSs. (B) Empirical cumulative distribution function of Arabidopsis U5 position-specific scoring matrix (PSSM) log-likelihood scores for 5’SSs with either //GURAG sequence or all other 5’SSs. U5 PSSM scores are calculated using a PSSM derived from all 5’SSs in the Araport11 reference annotation, at the −2 to −1 positions of the 5’SS, inclusive. (C) Arabidopsis sequence logos showing base frequency probabilities at the −3 to +5 positions for (above) 5’SSs with AG//GU sequence and (below) all other 5’SSs. (D) Empirical cumulative distribution function of Arabidopsis U6 PSSM log-likelihood scores for 5’SSs with different U5 classes. U6 PSSM scores are calculated using a PSSM derived from all 5’SSs in the Araport11 reference annotation, at the +3 to +5 positions of the 5’SS, inclusive. (E–F) Scatterplot showing the ratio of PSSM log-likelihoods (log-odds ratio) for U5 and U6 snRNA interacting sequences, at pairs of upstream and downstream alternative 5’SSs in (E) the Arabidopsis Araport11 reference annotation or (F) the H. sapiens GRCh38 reference annotation. A positive log-odds ratio indicates that the PSSM score of the upstream 5’SS is greater than that of the downstream 5’SS.

Opposing U5 and U6 snRNA interaction potential is a feature of alternative 5’SS pairs in some eukaryote genomes

Given that many 5’SSs appear to have either strong U5 or U6 snRNA interacting sequences, we speculated that opposing U5 and U6 snRNA interaction strengths at pairs of alternative 5’SSs could contribute to alternative splicing. To test this hypothesis, we calculated the log odds ratio of U5 and U6 PSSM scores for all pairs of annotated alternative 5’SSs in Arabidopsis. We found that these ratios were negatively correlated (Spearman’s ρ = −0.25, p<1 × 10−16), indicating that alternative 5’SS pairs tend to have complementary strengths with respect to U5 and U6 snRNA recognition (Figure 7E). The strength of this complementary relationship varies in different organisms: in humans, we found a stronger negative correlation between relative U5 and U6 PSSM scores (ρ = −0.40, p<1 × 10−16; Figure 7F), whereas in C. elegans, the correlation was weaker (ρ = −0.15, p=8.61 × 10−7; Figure 7—figure supplement 2A), and in D. rerio, there was no correlation (ρ = −0.01, p=0.58; Figure 7—figure supplement 2B). We conclude that changing the relative favourability of 5’SSs with stronger U5 or U6 snRNA interacting sequences, as occurs in fio1-3, could be a mechanism contributing to alternative 5’SS choice.

Discussion

The splicing of mRNAs encoding regulators of flowering time is disrupted in fio1

We identified fio1 through a two-step mutant screen designed to reveal factors that control the splicing of MAF2 intron 3. Importantly, temperature-sensitive splicing of MAF2 intron 3 links ambient temperature to flowering time control. fio1 mutants have increased retention of MAF2 intron 3 compared to WT Col-0. However, splicing of MAF2 intron 3 remains responsive to temperature in fio1 mutants, suggesting that FIO1 is not the thermosensor in this process.

We found that disruption of FIO1 alters the splicing of mRNA encoding not only MAF2 but other floral repressors too, including FLM and MAF3. Detectable levels of sense and antisense RNAs at the locus encoding the floral repressor FLC were reduced in fio1, but no splicing changes were detected. FLM, MAF2, MAF3, and FLC function together with SVP in higher-order protein complexes to repress the expression of FT and SOC1 (Gu et al., 2013). We detected elevated transcript levels of FT and SOC1 in fio1 mutants, consistent with the idea that floral repressor activity had been compromised. Splicing changes were present in transcripts encoding circadian modulators such as LHY and WNK1 (Kumar et al., 2011; Mizoguchi et al., 2002), which may contribute to the lengthening of the circadian period observed in fio1 mutants (Kim et al., 2008). Finally, we found that aberrant splicing limits the functional expression of AtSAR1 in fio1 mutants. AtSAR1 encodes a nucleoporin that controls CO protein abundance (Dong et al., 2006; Li et al., 2020; Parry et al., 2006) and FLC expression (Jung et al., 2013). As a result, sar1 mutants are early flowering due to increased CO protein levels (Li et al., 2020) and reduced FLC expression (Jung et al., 2013; Li et al., 2020). Overall, these findings suggest that the early flowering phenotype of fio1 results from splicing changes that reduce the activity of floral repressors and increase the activity of factors that promote flowering, such as CO.

FIO1-dependent m6A modification of U6 snRNA determines splicing accuracy and efficiency

Our data indicate that the major effect of FIO1 occurs through m6A modification of U6 snRNA and the subsequent interaction of m6A-modified U6 snRNA with target 5’SSs. Recent suggestions that FIO1 does not impact splicing (Wang et al., 2022; Xu et al., 2022) can be explained by underpowered experiments and unsuitable methodological approaches. Our reanalysis of recently published RNA-seq and nanopore DRS data in independent fio1 mutant alleles confirms that splicing is indeed disrupted, consistent with the conserved role of FIO1 in methylating U6 snRNA (Wang et al., 2022; Xu et al., 2022; Sun et al., 2022).

We cannot rule out the possibility that FIO1 directly targets other RNA species not detected by our approaches. However, our nanopore DRS analyses did not reveal widespread FIO1-dependent m6A sites in poly(A)+mRNA. We found that 8.7% of FIP37-dependent m6A sites had slightly altered modification rates in fio1-1, suggesting that loss of FIO1 might indirectly affect m6A sites written by the METTL3-like complex. Consistent with this, splicing of MTB (METTL14) RNA is also defective in fio1 mutants, potentially compromising MTB function. Notably, although data from three recent studies (Wang et al., 2022; Xu et al., 2022; Sun et al., 2022) show almost no overlap in respect of RNAs putatively modified by FIO1-dependent addition of m6A (Sun et al., 2022), we find that all these datasets confirm the impact of FIO1 on splice site selection.

We can explain the vast majority of fio1-sensitive splicing events using simple rules governed by sequence features of 5’SSs. When U6 snRNA is m6Amodified, 5’SSs with A+4 are favoured. In the absence of U6 snRNA m6A, 5’SSs with U+4 and/or stronger interactions with U5 snRNA loop 1 are favoured. Cryo-electron microscopy (cryo-EM) structures of the human spliceosome suggest U6 snRNA m6A faces 5’SS+4 (Bertram et al., 2017). Remarkably, we can separate almost 80% of FIO1-dependent 5’SS choices by the identity of the base at the +4 position of 5’SSs alone, suggesting that many of the splicing changes we detect are direct. In contrast, no obvious difference in splice site sequences was associated with temperature-dependent alternative splicing detected in our study.

Our findings are similar to those recently reported for S. pombe, where disruption of the FIO1 orthologue MTL16 results in widespread intron retention (Ishigami et al., 2021). A more diverse set of splicing events is disrupted in Arabidopsis fio1 mutants. Nevertheless, in both species, most changes in splicing can be explained by the impact of m6A modification on U6 snRNA recognition of the 5’SS+4 position or the relative strength of U5 and U6 snRNA interactions at 5’SSs. Defective splicing of specific introns in S. pombe mtl16Δ strains can be experimentally rescued by expression of mutated U5 snRNAs designed to strengthen U5 loop 1 interactions with the upstream exon (Ishigami et al., 2021). Together, these findings reveal the impact of U6 snRNA m6A modification and indicate that U5 and U6 snRNAs have cooperative and compensatory roles in 5’SS selection dependent on 5’SS sequence (Figure 8A).

Figure 8 with 1 supplement see all
Download asset Open asset
U6 m6A:5’SSA A+4 interactions during splicing.

(A) Model depicting U5 and U6 snRNA interactions with two major classes of 5’SS: //GURAG and AG//GU 5’SSs. //GURAG 5’SSs form strong interactions with U6 snRNA ACAGA (darkly shaded) and weaker interactions with U5 snRNA loop 1 (lightly shaded). AG//GU 5’SSs form strong interactions with U5 snRNA loop 1 and weaker interactions with U6 snRNA ACAGA. (B) Cryo-electron microscopy (cryo-EM) analysis of human pre-B and B complexes with RNA interactions detailed in the expanded section (PDB 6AHD; Bertram et al., 2017) and Prp8 shown in the background as a common scaling reference. The U6 snRNA ACAGA and U5 snRNA loop 1 sequences are missing from cryo-EM structures at this stage, probably because they present as flexible loops. In B complex, C42 and 5’SS G+5 form a canonical Watson–Crick pair. m6A43 and 5’SS A+4 form a trans Hoogsteen sugar edge interaction (Leontis et al., 2002) that caps and stabilises the U6/5’SS helix by stacking because U6 snRNA G44 and 5’SS A+3 have not yet formed a stable interaction. The 5’SS is kinked, and U5 snRNA loop 1 is docked on the upstream exon. The methyl group of U6 snRNA m6A43 is not modelled in the structure due to lack of resolution. (C) Model depicting U6 m6A interactions at different stages of splicing. In B complex, U6 m6A43 stabilises the U6/5’SS helix by stacking. As the active site forms in Bact, this role becomes less important because U6 snRNA G44 interacts more stably with 5’SS+3 and U6 A45 stacks on the helix stabilised by R554 of SF3B2. In C complex, the U6/5’SS helix is stabilised by N57 of hYJU2. In C* complex, the U6m6A43:5’SS+4 interaction becomes more important again because the 5’SS+3 pivots to a new position. The m6A43 and 5’SS+4 pair forms part of a continuous helical stack with the docked 3’ splice site (3’SS), which is capped by the interaction between 3’SS−3 and Q1522 of Prp8. For more detail, see Figure 8—figure supplement 1.

Two major classes of 5’SS linking cooperative and compensatory roles for U5 and U6 snRNA in 5’SS selection

Our analyses of annotated Arabidopsis 5’SSs identified anti-correlated biases in sequence composition at U5 and U6 snRNA interacting positions. We found the same to be true for 5’SSs in other eukaryotes, including humans. Compensatory patterns of base composition at human 5’SSs have been described (Burge and Karlin, 1997; Carmel et al., 2004; Sibley et al., 2016; Wong et al., 2018; Artemyeva-Isman and Porter, 2021). For example, a ‘seesaw linkage’ pattern was observed where −1 G permits any nucleotide at position +5, and conversely,+5 G permits any nucleotide at position −1. Our findings suggest that such compensatory base composition at 5’SSs can be accounted for by two major classes of 5’SS recognised mainly by interactions with either U5 snRNA loop 1 or the U6 snRNA ACAGA box. Furthermore, the cooperativity of U5 and U6 snRNA function in 5’SS selection may explain why having Gs at both −1 and +5 positions is highly preferential for efficient splicing (Wong et al., 2018). Compensatory interactions are likely to facilitate degeneracy in sequences that can be recognised as 5’SSs. Degeneracy may act as a buffer against deleterious mutations in splice site sequences, as well as lowering barriers to the evolution of new splicing structures. This is important because alternative splicing is clearly associated with developmental complexity (Bush et al., 2017; Nilsen and Graveley, 2010).

What is the role of U6 snRNA m6A modification in 5’ and 3’SS selection?

Our analysis of available cryo-EM structures of human spliceosomes (Bertram et al., 2017; Bertram et al., 2020; Fica et al., 2019; Zhang et al., 2018) does not provide clear evidence of a direct interaction between U6 snRNA m6A and a spliceosomal protein (Figure 8B; Figure 8—figure supplement 1). Instead, during the transfer of the 5’SS from U1 snRNA to U6 and U5 snRNAs in spliceosomal B complexes, U6 ACm6AGA m6A faces 5’SS A+4 in a trans Hoogsteen sugar edge interaction that could stabilise the 5’SS/U6 helix by capping (Figure 8B). This is important because 5’SS A+3 is not aligned to stack on A+4 at this stage. However, later in spliceosomal Bact and C complexes, 5’SS A+3 engages in a more stable interaction with the U6 snRNA G44 adjacent to m6A (ACm6AGA), stacking on top of the 5’SS/U6 helix and stabilising it (Figure 8C; Figure 8—figure supplement 1). Such stabilisation is important because degenerate 5’SS sequences mean that the helix formed with U6 snRNA ACAGA is relatively weak, short, and comprised mostly of non-canonical RNA-RNA interactions (Figure 8B).

Our global RNA-seq analyses reveal that m6A-modified U6 snRNA pairs less readily with 5’SSs containing U+4 than those containing A+4. Biophysical data from model RNAs provide a possible explanation for this finding: an m6A-U base pair can form in a duplex, but the methylamino group rotates from a syn geometry on the Watson–Crick face to a higher-energy anti-conformation, positioning the methyl group in the major groove (Roost et al., 2015). As a result, m6A has a destabilising effect on A−U basepairs in short RNA helices (Kierzek and Kierzek, 2003; Roost et al., 2015). Therefore, 5’SS U+4 may be selected less frequently by m6A-modified U6 snRNA because of destabilisation of an already weak helix. In contrast, the thermal stability of m6A:A is increased compared to A:A (Roost et al., 2015). Biophysical measurements also indicate m6A in unpaired positions base stacks more strongly than the unmodified base, adding substantial stabilisation to adjacent duplexes (Roost et al., 2015). In the absence of U6 snRNA m6A modification, our data reveal that 5’SS U+4 sites are preferred. This is consistent with a relatively strong interaction being important at the terminal position of the U6 snRNA ACAGA helix in the B complex to stabilise its formation.

The potential role of U6 snRNA m6A in 3’SS selection may be explained by U6 ACAGA interactions during the remodelling of the spliceosome for the second splicing reaction (Figure 8C; Figure 8—figure supplement 1). In humans, RNA rearrangements during the C to C* transition include stacking of the 3’SS G−1 onto U6 A45 (ACAGA), which remains paired to U+2 of the 5’SS (Fica, 2020; Fica et al., 2019; Wilkinson et al., 2017). This results in a continuous helix stack, involving the interaction between U6 A43 and 5’SS A+4, which forms the receptor onto which the 3’SS docks. Our data are consistent with a model in which a strong interaction between U6 and the 5’SS +4 position stabilises this receptor, enabling 3’SSs distal to the branchpoint to compete more efficiently with proximal 3’SSs that are favoured by scanning (Smith et al., 1993). A more stable receptor could allow the ATPase Prp22, which proofreads exon ligation (Mayas et al., 2006), to promote more efficient sampling and usage of distal 3’SSs. This has previously been observed in S. cerevisiae (Semlow et al., 2016), where the U6/5’SS helix is intrinsically stronger than in Arabidopsis and humans (Plaschka et al., 2019; Wilkinson et al., 2020).

A regulatory or adaptive role for U6 snRNA m6A modification?

Alternative splicing is the result of competition between multiple splicing choices. Our analysis of annotated alternative 5’SS pairs in Arabidopsis (and humans) revealed that when one of the alternative 5’SS pair exhibited strong U5 snRNA loop 1 recognition, the other was more likely to have stronger complementarity to U6 snRNA ACAGA box. This suggests that alternative splicing could be regulated by changing the relative favourability of U5 and U6 snRNA interactions.

It is an open question as to whether m6A modification of U6 snRNA is regulated. Either the activity of FIO1 might be controlled or demethylases might act directly upon U6 snRNA. There is a precedent for the control of splicing by regulation of U6 snRNA modifications because pseudouridylation of S. cerevisiae U6 snRNA, which controls entry into filamentous growth, can increase the splicing efficiency of suboptimal introns (Basak and Query, 2014). Human UsnRNAs are targeted by demethylases. For example, FTO targets cap adjacent methylation (m6Am) in UsnRNAs (except U6), and this activity may account for splicing differences detected in FTO knockout backgrounds (Mauer et al., 2019). Notably, Arabidopsis mutants defective in the function of the RNA demethylase ALKBH10b flower late (Duan et al., 2017).

Two genome-wide association studies have identified sequence differences at or near the FIO1 locus associated with natural variation in Arabidopsis ecotypes’ flowering time (Price et al., 2020; Sasaki et al., 2015). It will be important to test whether genetic variation alters the efficiency of U6 snRNA m6A modification by FIO1 in different ecotypes and what impact this has upon global splicing patterns, including for the regulators of flowering time that we characterise here. There are 13 genes encoding U6 snRNA in the Arabidopsis Col-0 genome (Wang and Brendel, 2004). Currently, we know little about the relative patterns of U6 snRNA gene expression or m6A modification status and how this may vary in different ecotypes. Indeed, this paucity of knowledge on U6 snRNA variants’ modification and expression applies to humans too. Our study on U6 snRNA m6A modification has important implications for understanding the mechanism of splicing and the evolution of alternative splicing. It will now be interesting to investigate the possibility that modulation of U6 snRNA m6A may be regulatory or adaptive.

Materials and methods

Plant material

Request a detailed protocol

The wild-type Col-0 accession, fio1-3 (SALK_084201), and maf2 (SALK_045623) were obtained from Nottingham Arabidopsis Stock Centre. The fio1-1 mutant was a gift from Prof Hong Gil Nam (Daegu Gyeongbuk Institute of Science and Technology), Republic of Korea. The fip37-4 mutant was a gift from Prof Rupert Fray (University of Nottingham), UK.

Plant growth conditions

Request a detailed protocol

Seeds of wild-type Col-0, fip37-4, and fio1-1 used for nanopore DRS and m6A immunopurification were surface sterilised and sown on MS10 media plates supplemented with 2% agar, stratified at 4°C for 2 days, germinated in a controlled environment at 20°C under 16 hr light/8 hr dark conditions, and harvested 14 days after transfer to 20°C. Seeds of wild-type Col-0 and fio1-3 used for Illumina RNA-seq were surface sterilised and sown on 0.5 MS media plates supplemented with 2% agar, stratified at 4°C for two days, germinated in a controlled environment at 20°C under 16 hr light/8 hr dark conditions for 8 days. Seedlings were then transferred to either 28, 20, 12, or 4 °C for 4 hr under dark conditions before harvesting. Seeds used for MAF2 splicing analysis were sown on 0.5 MS media plates supplemented with 2% agar, stratified at 4°C for two days, germinated in a controlled environment at 20°C under 16 hr light/8 hr dark conditions, and harvested 14 days after transfer to 20°C.

Mutant screen

Request a detailed protocol

The two-step EMS mutant screen was conducted in a Col-0 line carrying a homozygous transgene in which the genomic MAF2 coding region was translationally fused to luciferase (gMAF2:LUC). A gateway cloning approach was used to introduce gMAF2:LUC into the Alligator vector pFP101, which features a recombination site downstream of a CaMV 35 S promoter and selection by Green Fluorescent Protein (GFP) fluorescence (Bensmihen et al., 2004). Agrobacterium tumefaciens strain GV3101 was used to transform Col-0 via the floral dip method (Clough and Bent, 1998). A homozygous line with strong LUC expression and a clear GFP fluorescence in the seed coat (Alligator selective marker) was identified and used for EMS mutagenesis.

Approximately, 20,000 M0 seeds of the gMAF2:LUC line were soaked overnight in 100 mL of phosphate buffer at 4°C. The buffer was replaced, with EMS added to a final concentration of 25 mM, and the seeds were incubated at room temperature with gentle agitation for 16 hr. The EMS was neutralised with 1 M NaOH, and the seeds were gently washed twice with 100 mM sodium thiosulphate for 15 min, followed by three 15 min washes in distilled water. The M1 seeds were air-dried on filter paper overnight, before planting on soil. The resulting plants were allowed to self-pollinate and grow to maturity. M2 seeds were collected from all plants. Approximately, 15,000 seeds were screened in two steps. In step 1, stratified seeds were planted on soil and grown in controlled environment chambers at 16°C, 16 hr light/8 hr dark, with light intensity of 200 µmol/m2/s. The first 100 plants to flower were selected for further screening. Splicing of MAF2 intron 3 was assessed by RT-qPCR to identify early flowering lines showing enhanced intron retention at 16°C. Although the parental line had the gMAF2:LUC reporter, luciferase activity was not monitored at any stage. Leaf material was frozen and homogenized using QIAGEN TissueLyser LT. RNA was extracted using a Nucleospin II RNA extraction kit (Machery–Nagel). Total RNA (1.5 µg per sample) was reverse-transcribed using the High Capacity cDNA Reverse Transcription Kit with Rnase Inhibitor (Applied Biosystems). Amplification of MAF2 was performed according to manufacturer’s guidelines for 35 PCR cycles using primers 3 and 4 from a previous study (Rosloski et al., 2013). These primers, which span MAF2 intron 3, generate two products, which correspond to MAF2 var2 (MAF2 intron 3 retained) and MAF2 var1 (MAF2 intron 3 excised), respectively. PCR amplified products were separated on a 2% w/v agarose gel to resolve the splice variants. M2 plants showing a significantly enhanced var2:var1 ratio compared to the parental line control were selected for further testing.

Bulk segregant analysis for mutant mapping

Request a detailed protocol

The EMS-129 line was backcrossed to the parental gMAF2:LUC reporter line to generate an F2 segregating population. Phenotypically early flowering and wild-type flowering time plants were identified from this F2 population and separated for bulk DNA sequencing. Genomic DNA was extracted using a Qiagen Plant DNA Maxi kit. Sequencing was carried out by the University of Leeds Next Generation Sequencing (NGS) facility using a HiSeq3000 sequencer with a 150 bp paired end library.

Sequenced reads were mapped to the TAIR10 reference sequence using bwa-mem2 (Vasimuddin et al., 2019). SNPs were called using bcftools and filtered for EMS-induced G>A transitions only (Danecek et al., 2021). Functional consequences of each SNP were predicted using SnpEff (Cingolani et al., 2012). Allele fraction plots were generated from vcf files using matplotlib. Significance testing was performed for each SNP using G-tests and smoothed using a tri-cube kernel with a window size of 2 megabases.

Nanopore DRS

Total RNA isolation

Request a detailed protocol

Total RNA was isolated using Rneasy Plant Mini kit (Qiagen) and treated with TURBO Dnase (ThermoFisher Scientific). The total RNA concentration was measured using a Qubit 1.0 Fluorometer and Qubit RNA BR Assay Kit (ThermoFisher Scientific). RNA quality and integrity were assessed using the NanoDrop 2000 spectrophotometer (ThermoFisher Scientific) and Agilent 2200 TapeStation System (Agilent).

Preparation of libraries for direct RNA sequencing of poly(A)+ mRNA using nanopores

Request a detailed protocol

Total RNA was isolated from the Col-0, fip37-4, and fio1-1 seedlings as detailed above. mRNA isolation and preparation of nanopore DRS libraries using the SQK-RNA002 nanopore DRS Kit (Oxford Nanopore Technologies) were performed as previously described (Parker et al., 2020). Libraries were loaded onto R9.4 SpotON Flow Cells (Oxford Nanopore Technologies) and sequenced using a minION device for a 48 hr runtime. Four biological replicates were performed for each genotype.

Nanopore DRS mapping

Request a detailed protocol

Nanopore DRS reads were basecalled using Guppy version 3.6.0 high accuracy RNA model. For mRNA modification analysis, reads were mapped to the Araport11 reference transcriptome (Cheng et al., 2017) using minimap2 version 2.17 (Li, 2018), with parameters -a -L –cs =short k14 –for-only –secondary =no. For other analyses, reads were mapped to the Arabidopsis TAIR10 genome (Arabidopsis Genome Initiative, 2000) using two pass alignment with minimap2 version 2.17 and 2passtools version 0.3 (Parker et al., 2021b). First pass minimap2 alignment was performed using the parameters -a -L –cs =short -x splice -G20000 –end-seed-pen 12 -uf. 2passtools score was then run with default parameters on each replicate to generate junctions, followed by 2passtools merge to combine them into a final set of guide junctions. Reads were remapped with minimap2 using the same parameters but with the addition of the guide junctions using –junc-bed and –juncbonus =10. Pipelines for processing of nanopore DRS data were built and executed using Snakemake version 6.15.3 (Köster and Rahmann, 2012). Public nanopore DRS data downloaded from ENA accessions PRJNA749003 (Xu et al., 2022) and PRJNA877932 (Sun et al., 2022) were processed in the same way as newly generated data.

Nanopore poly(A)+ mRNA modification analysis

Request a detailed protocol

Differential modification analysis was performed on Col-0, fip37-4, and fio1-1 data using the ‘n-sample’ GitHub branch of Yanocomp (Parker et al., 2021a). Kmer-level signal data were generated using f5c eventalign version 0.13.2 (Gamaarachchi et al., 2020; Loman et al., 2015) and Yanocomp prep. A three-way comparison between the genotypes was performed using Yanocomp gmmtest, with a minimum KS statistic of 0.25. A 5% false discovery rate threshold was used to identify transcriptomic sites with significant changes in modification rate. Motif analysis was performed using meme version 5.1.1 with the parameters -cons NNANN -minw 5 -maxw 5 -mod oops (Bailey et al., 2015). Differential poly(A) site usage was performed using d3pendr version 0.1 with default parameters and thresholded using a 5% false discovery rate and an effect size (measured using earth mover distance) of 25 (Parker et al., 2021c).

Illumina RNA sequencing

Preparation of libraries for Illumina RNA sequencing

Request a detailed protocol

Total RNA was isolated from Col-0 and fio1-3 seedlings using Nucleospin RNA kit (Macherey–Nagel, 740955) and treated with rDNase (Macherey–Nagel, CAS 9003-98-9) on columns according to manufacturers’ instructions. RNA concentration, quality, and integrity were assessed using the NanoDrop 1000 spectrophotometer (Labtech) and agarose gel electrophoresis. Poly(A)+RNA purification and Illumina RNA-seq library preparation were performed by Genewiz UK Ltd. Poly(A)+RNA was selected with NEBNext Poly(A) mRNA Magnetic Isolation Module. Preparation of the sequencing libraries was performed using the NEBNext Ultra II Directional RNA Library Prep Kit for Illumina (New England Biolabs). 150 bp paired-end sequencing was carried out using Illumina Novaseq 6000. Six biological replicates were performed for each genotype.

Illumina RNA sequencing data processing

Request a detailed protocol

Illumina RNA-seq data were assessed for quality using FastQC version 0.11.9 and MultiQC version 1.8 (Andrews, 2017; Ewels et al., 2016). Reads were mapped to the TAIR10 genome using STAR version 2.7.3 a (Dobin et al., 2013) with a splice junction database generated from the Araport11 reference annotation (Cheng et al., 2017). We used Stringtie version 2.1.7 in mix mode (Kovaka et al., 2019) to generate condition-specific transcriptome assemblies from Illumina RNA-seq replicates and pooled Nanopore DRS data. All assemblies were merged with the Araport11 reference annotation using Stringtie merge to create a unified set of transcripts for quantification. Transcript open reading frames were annotated using Transuite version 0.2.2 (Entizne et al., 2020), which was also used to predict nonsense-mediated decay sensitivity. Pipelines were written and executed using Snakemake version 6.15.3 (Köster and Rahmann, 2012).

Transcripts were quantified using Salmon version 1.1.0 (Patro et al., 2017) with the TAIR10 genome assembly as decoys. SUPPA version 2.3 was used to generate event level PSIs from transcript level quantifications (Trincado et al., 2018). PSIs were loaded into Python 3.6.7 using pandas version 1.0, and generalised linear models (GLMs) were fitted per event using statsmodels version 0.11 (Harris et al., 2020; McKinney, 2010; Oliphant, 2007; Seabold and Perktold, 2010). GLMs were used to test the relationship of PSI with genotype, temperature, and genotype×temperature interaction. Calculated p values were adjusted for multiple testing using the Benjamini–Hochberg false discovery rate method. A false discovery rate of 5% was chosen to threshold events with significant changes in PSI which correlated with genotype, temperature, or genotype×temperature. Changes in motif composition were tested using G-tests of base frequencies at the −2 to +5 position of the splice site. To generate sequence logos, 5’SS or 3’SS from sets of alternative splicing events was filtered to remove duplicated positions, and probability logos were plotted using matplotlib version 3.3 and matplotlib_logo (Hunter, 2007; Parker, 2022b). Contingency tables of splice site classes at U5 and U6 interacting positions were generated using the difference of the −2 to −1 positions of the 5’SS from the consensus motif AG, and the difference of the +3 to +5 positions of the 5’SS from the consensus motif RAG, respectively. Classes were ordered by their log-likelihoods using PSSMs generated from all annotated 5’SSs (described below). Heatmaps of contingency tables were generated with seaborn version 0.11 (Waskom, 2021). Gene tracks using reads aligned to the TAIR10 reference genome were generated using pyBigWig version 0.3.17, pysam version 0.18, and matplotlib version 3.3 (Heger et al., 2014; Hunter, 2007; Ramírez et al., 2014).

Public Illumina RNA-seq datasets were downloaded from GSA accession CRA004052 (Wang et al., 2022) and ENA accession PRJNA877932 (Sun et al., 2022). Quality control was performed using FastQC and MultiQC as described above (Andrews, 2017; Ewels et al., 2016). Col-0 replicate 1 of dataset CRA004052 was discarded due to extreme GC-bias, likely caused by PCR overamplification and/or low RNA input. Transcript-level quantification and PSI estimation were performed as described above. PSIs were used to estimate splicing changes in fio1 mutant alleles using SUPPA2 diffSplice (Trincado et al., 2018).

Global splice site analyses

Request a detailed protocol

To measure the predicted strengths of U5 snRNA loop 1 and U6 snRNA ACAGA box interactions for individual sequences, all 5’SSs annotated in the Araport11 reference transcriptome (Cheng et al., 2017) were used to generate log transformed PSSMs. The U5 and U6 log-likelihood scores for individual sequences were then calculated using the −2 to −1 and +3 to +5 positions, respectively. Correlation of U5 and U6 PSSM scores was calculated using Spearman rank correlation coefficient. This analysis was repeated using 5’SSs from the H. sapiens GRCh38 (International Human Genome Sequencing Consortium, 2004), C. elegans Wbcel235 (The C. elegans Sequencing Consortium, 1998), D. melanogaster BDGP6 (dos Santos et al., 2015), and D. rerio GRCz11/danRer11 (Howe et al., 2013) genome assemblies and annotations, downloaded from Ensembl Genomes release 104 (Howe et al., 2021). To measure relative U5 and U6 interactions for pairs of alternative 5’SSs, SUPPA was used to identify pairs of alternative 5’SSs in each genome annotation (Trincado et al., 2018). These alternative 5’SS pairs were ordered by their genomic positions relative to the strand of the parent gene (i.e. upstream and downstream), and log-odds ratios were calculated using downstream 5’SS log-likelihoods as the denominator. Correlation of U5 and U6 log-odds ratios was calculated using Spearman rank correlation coefficient. Scatter plots with linear regression lines were plotted using seaborn (Waskom, 2021), and 95% CIs for regression lines were calculated using bootstrap sampling with replacement.

Immunopurification and detection of m6A modified RNA

Synaptic systems anti-m6A

Request a detailed protocol

Total RNA was purified from ~300 mg of frozen plant tissue using the miRVana miRNA isolation kit (Ambion) and treated with DNase I (New England Biolabs) according to the manufacturer’s instructions. The quantity and integrity of RNA were checked using a NanoDrop 2000 spectrophotometer (Thermo Fisher Scientific) and Agilent 2200 TapeStation System. Approximately 5 μg of RNA was suspended in 500 μL low-salt buffer (50 mM Tris-HCl pH 7.4, 150 mM NaCl, and 0.5% v/v NP-40), with 80 U RNAsin Plus RNase inhibitor, (Promega) and 10 μL (1 mg/mL) m6A-rabbit polyclonal purified antibody (#202 003 Synaptic Systems). The samples were mixed by rotation for 2 hr at 4°C. Protein A/G magnetic beads (Pierce, ThermoFisher) were washed twice with low-salt buffer, then added to each RNA/antibody sample and mixed with rotation at 4°C for 16 hr. The beads were washed twice with high-salt buffer (50 mM Tris-HCl pH 7.4, 0.5 M NaCl, and 1% v/v NP-40), twice with low-salt buffer, and twice with Polynucleotide kinase (PNK) wash buffer (20 mM Tris-HCl pH 7.4, 10 mM MgCl2, and 0.2% v/v Tween-20). Immunopurified RNA was eluted by digestion with proteinase K in 200 μL of proteinase K (PK) buffer (50 mM Tris-HCl pH 7.4, 150 mM NaCl, 1 mM EDTA, and 0.1% w/v SDS) at 37°C for 20 min with shaking at 300 rpm, followed by phenol-chloroform extraction and sodium acetate/ethanol precipitation.

Immunopurifed RNA (45 ng) was reverse transcribed (RT) with U6 and U2 snRNA reverse primers using SuperScript III Reverse Transcriptase (ThermoFisher), according to the manufacturer’s instructions. RT-qPCR was carried out using the SYBR Green I (Qiagen) mix with primers targeted to U2 and U6 snRNA (Supplementary file 2). The specificity of RT-qPCR was confirmed by sequencing of amplified products.

Millipore anti-m6A

Request a detailed protocol

Total RNA was purified from ~600 mg of frozen plant tissue using the miRVana miRNA isolation kit (Ambion) and treated with DNase I (New England Biolabs), according to the manufacturer’s instructions. The quantity and integrity of RNA were checked using a NanoDrop 1000 spectrophotometer (Thermo Fisher Scientific). After sodium acetate/ethanol precipitation, approximately 10 μg of RNA was resuspended in 20 μL nuclease free water, with 5% of the RNA being kept for the input sample.

Protein A/G magnetic beads (Millipore, 16–663) were washed twice with m6A wash buffer (10 mM TrisHCl pH7.4, 150 mM NaCl, and 0.1% v/v NP-40) and then resuspended in 50 μL m6A wash buffer. 5 μL (1 mg/mL) of Anti-N6-methyladenosine (m6A) antibody (Millipore, ABE572) or Rabbit Anti-IgG (Thermofisher, A16104) was coupled to the washed beads on a roller for 40 min at room temperature. After incubation, beads were washed three times in m6A wash buffer. m6A immunoprecipitation buffer was then added to the beads (10 mM TrisHcl pH7.4, 150 mM NaCl, 0.1% v/v NP-40, and 17.5 mM EDTA pH 8) with 80 U SUPERase•In RNase Inhibitor, and 10 μL of each RNA sample was added to both the anti-m6A and anti-IgG antibody/beads mixture. Samples were mixed by rotation at 4°C for 16 hr. The beads were washed five times with m6A wash buffer. Immunopurified and 5% input RNA was eluted by digestion with proteinase K in 150 μL of PK buffer (50 mM Tris-HCl pH 7.4, 150 mM NaCl, 0.1% v/v NP-40, and 0.1% w/v SDS) at 55°C for 30 min, followed by extraction with TRIzol LS (10296028, Thermofisher) and sodium acetate/ethanol precipitation.

Immunopurifed RNA (500 ng) was RT with random hexamers using ThermoFisher MultiscribeTM II Reverse Transcriptase (4311235, Thermo Fisher Scientific) according to the manufacturer’s instructions. RT-qPCR was carried out using the SYBR Green I (Qiagen) mix with primers targeted to U2 and U6 snRNA (Supplementary file 2). The specificity of RT-qPCR was confirmed by sequencing of amplified products.

m6A liquid chromatography with tandem mass spectrometry

Request a detailed protocol

Total RNA was isolated as described above. Poly(A)+RNA was purified using the Dynabeads mRNA purification kit (Thermo Fisher Scientific) according to the manufacturer’s instructions. The quality and quantity of mRNA were assessed using a NanoDrop 2000 spectrophotometer and Agilent 2200 TapeStation System. Samples for m6A LC-MS/MS were prepared as previously described (Huang et al., 2018) with modifications according to Parker et al., 2021c. LC-MS/MS was carried out by the FingerPrints Proteomics facility at the University of Dundee. m6A/A ratio quantification was performed in comparison with the curves obtained from pure adenosine (endogenous P1 receptor agonist, Abcam) and m6A (modified adenosine analog, Abcam) nucleoside standards. Statistical analysis was performed using a two-way t-test.

Code availability

Request a detailed protocol

All pipelines, scripts, and notebooks used to generate figures are available from GitHub at https://github.com/bartongroup/Simpson_Davies_Barton_U6_methylation and Zenodo at https://zenodo.org/record/6372644 (Parker, 2022a).

Data availability

Illumina sequencing data from the genetic screen that identified fio1-4 is available from ENA accession PRJEB51468. Col-0, fip37-4 and fio1-1 nanopore DRS data is available from ENA accession PRJEB51364. Col-0 and fio1-3 Illumina RNA-Seq data is available from ENA accession PRJEB51363.

The following data sets were generated
    1. Parker MT
    2. Soanes BK
    3. Kusakina J
    4. Larrieu A
    5. Knop K
    6. Joy N
    7. Briedenbach F
    8. Sherwood A
    9. Barton GJ
    10. Fica SM
    11. Davies B
    12. Simpson GG
    (2022) European Nucleotide Archive (EMBL-EBI)
    ID PRJEB51468. Mutant screen of early flowering Arabidopsis EMS mutants with increased MAF2 intron retention.
    https://www.ebi.ac.uk/ena/browser/view/PRJEB51468
The following previously published data sets were used
    1. Xu T
    2. Wu X
    3. Wong CE
    4. Fan S
    5. Zhang Y
    6. Zhang S
    7. Liang Z
    8. Yu H
    (2022) European Nucleotide Archive (EMBL-EBI)
    ID PRJNA749003. N6-Adenosine (m6A) Methylation profiling in Arabidopsis thaliana wild-type and fio1-2 by nanopore DRS sequencing.
    https://www.ebi.ac.uk/ena/browser/view/PRJNA749003
    1. Sun B
    2. Bhati KK
    3. Song P
    4. Edwards A
    5. Petri L
    6. Kruusvee V
    7. Blaakmeer A
    8. Dolde U
    9. Rodrigues V
    10. Straub D
    11. Yang J
    12. Jia G
    13. Wenkel S
    (2022) NCBI Gene Expression Omnibus
    ID GSE171928. Next Generation Sequencing of Wild Type (Col-0), fio1-1 and fio1-2 methylated RNA immunoprecipitation and transcriptome in Arabidopsis thaliana.
    https://www.ncbi.nlm.nih.gov/geo/query/acc.cgi?acc=GSE171928
    1. Wang C
    2. Yang J
    3. Song P
    4. Zhang W
    5. Lu Q
    6. Yu Q
    7. Jia G
    (2022) Genome Sequence Archive (CNCB)
    ID CRA004052. Identification and Function Research of Methyltransferase of N6 Methyladenine in Plants.
    https://ngdc.cncb.ac.cn/gsa/browse/CRA004052

References

    1. Bush SJ
    2. Chen L
    3. Tovar-Corona JM
    4. Urrutia AO
    (2017) Alternative splicing and the evolution of phenotypic novelty
    Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences 372:20150474.
    https://doi.org/10.1098/rstb.2015.0474
    1. Gu J
    2. Patton JR
    3. Shimba S
    4. Reddy R
    (1996)
    Localization of modified nucleotides in Schizosaccharomyces pombe spliceosomal small nuclear rnas: modified nucleotides are clustered in functionally important regions
    RNA 2:909–918.
    1. McKinney W
    (2010)
    Data structures for statistical computing in pythonproceedings of the 9th python in science conference
    Austin, TX pp. 51–56.
  103. Conference
    1. Vasimuddin M
    2. Misra S
    3. Li H
    4. Aluru S
    (2019) Efficient Architecture-Aware Acceleration of BWA-MEM for Multicore Systems
    2019 IEEE International Parallel and Distributed Processing Symposium (IPDPS. pp. 314–324.
    https://doi.org/10.1109/IPDPS.2019.00041

Article and author information

Author details

  1. Matthew T Parker

    School of Life Sciences, University of Dundee, Dundee, United Kingdom
    Contribution
    Conceptualization, Data curation, Software, Formal analysis, Validation, Investigation, Visualization, Methodology, Writing – original draft, Writing – review and editing
    Competing interests
    No competing interests declared
    ORCID icon "This ORCID iD identifies the author of this article:" 0000-0002-0891-8495

  2. Beth K Soanes

    Centre for Plant Sciences, School of Biology, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    Contribution
    Conceptualization, Data curation, Software, Formal analysis, Validation, Investigation, Visualization, Methodology, Writing – original draft, Project administration, Writing – review and editing
    Competing interests
    No competing interests declared

  3. Jelena Kusakina

    Centre for Plant Sciences, School of Biology, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    Contribution
    Conceptualization, Formal analysis, Validation, Investigation, Methodology, Writing – original draft, Project administration, Writing – review and editing
    Competing interests
    No competing interests declared

  4. Antoine Larrieu

    Centre for Plant Sciences, School of Biology, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    Contribution
    Conceptualization, Resources, Formal analysis, Validation, Investigation, Methodology, Project administration, Writing – review and editing
    Competing interests
    No competing interests declared

  5. Katarzyna Knop

    School of Life Sciences, University of Dundee, Dundee, United Kingdom
    Present address
    Cancer Research UK Beatson Institute, Glasgow, United Kingdom
    Contribution
    Conceptualization, Resources, Formal analysis, Funding acquisition, Validation, Investigation, Methodology, Project administration, Writing – review and editing
    Competing interests
    No competing interests declared
    ORCID icon "This ORCID iD identifies the author of this article:" 0000-0002-2636-9450

  6. Nisha Joy

    School of Life Sciences, University of Dundee, Dundee, United Kingdom
    Contribution
    Conceptualization, Formal analysis, Funding acquisition, Validation, Investigation, Methodology, Project administration, Writing – review and editing
    Competing interests
    No competing interests declared

  7. Friedrich Breidenbach

    1. School of Life Sciences, University of Dundee, Dundee, United Kingdom
    2. RNA Biology and Molecular Physiology, Faculty of Biology, Bielefeld University, Bielefeld, Germany
    Contribution
    Conceptualization, Formal analysis, Funding acquisition, Validation, Investigation, Methodology, Project administration, Writing – review and editing
    Competing interests
    No competing interests declared
    ORCID icon "This ORCID iD identifies the author of this article:" 0000-0002-9610-1927

  8. Anna V Sherwood

    School of Life Sciences, University of Dundee, Dundee, United Kingdom
    Present address
    Section for Computational and RNA Biology, Department of Biology, University of Copenhagen, Copenhagen, Denmark
    Contribution
    Formal analysis, Validation, Investigation, Methodology, Project administration, Writing – review and editing
    Competing interests
    No competing interests declared
    ORCID icon "This ORCID iD identifies the author of this article:" 0000-0001-7153-8420

  9. Geoffrey J Barton

    School of Life Sciences, University of Dundee, Dundee, United Kingdom
    Contribution
    Conceptualization, Resources, Supervision, Funding acquisition, Project administration, Writing – review and editing
    Competing interests
    No competing interests declared
    ORCID icon "This ORCID iD identifies the author of this article:" 0000-0002-9014-5355

  10. Sebastian M Fica

    Department of Biochemistry, University of Oxford, Oxford, United Kingdom
    Contribution
    Conceptualization, Formal analysis, Funding acquisition, Visualization, Writing – original draft, Project administration, Writing – review and editing
    Competing interests
    No competing interests declared

  11. Brendan H Davies

    Centre for Plant Sciences, School of Biology, Faculty of Biological Sciences, University of Leeds, Leeds, United Kingdom
    Contribution
    Conceptualization, Resources, Supervision, Funding acquisition, Writing – original draft, Project administration, Writing – review and editing
    For correspondence
    b.h.davies@leeds.ac.uk
    Competing interests
    No competing interests declared

  12. Gordon G Simpson

    1. School of Life Sciences, University of Dundee, Dundee, United Kingdom
    2. Cell & Molecular Sciences, James Hutton Institute, Invergowrie, United Kingdom
    Contribution
    Conceptualization, Resources, Supervision, Funding acquisition, Writing – original draft, Project administration, Writing – review and editing
    For correspondence
    g.g.simpson@dundee.ac.uk
    Competing interests
    No competing interests declared
    ORCID icon "This ORCID iD identifies the author of this article:" 0000-0001-6744-5889

Funding

Biotechnology and Biological Sciences Research Council (BB/M000338/1)

  • Brendan H Davies

Biotechnology and Biological Sciences Research Council (BB/W007967/1)

  • Brendan H Davies

Biotechnology and Biological Sciences Research Council (BB/T007222/1)

  • Beth K Soanes

HORIZON EUROPE Marie Sklodowska-Curie Actions (799300)

  • Katarzyna Knop

HORIZON EUROPE Marie Sklodowska-Curie Actions (896598)

  • Nisha Joy

Wellcome Trust (220212/Z/20/Z)

  • Sebastian M Fica

Global Challenges Research Fund (University of Dundee Global Challenges Research Fund)

  • Geoffrey J Barton
  • Gordon G Simpson

Biotechnology and Biological Sciences Research Council (BB/W007673/1)

  • Gordon G Simpson

Biotechnology and Biological Sciences Research Council (BB/V010662/1)

  • Geoffrey J Barton
  • Gordon G Simpson

Biotechnology and Biological Sciences Research Council (BB/M010066/1)

  • Geoffrey J Barton
  • Gordon G Simpson

Biotechnology and Biological Sciences Research Council (BB/M004155/1)

  • Geoffrey J Barton
  • Gordon G Simpson

The funders had no role in study design, data collection and interpretation, or the decision to submit the work for publication. For the purpose of Open Access, the authors have applied a CC BY public copyright license to any Author Accepted Manuscript version arising from this submission.

Acknowledgements

We thank Mary McKay (School of Biology, University of Leeds) for excellent technical assistance with the EMS mutant screen. We are indebted to Oliver Manners for help in establishing m6A immunoprecipitation. We thank Abdelmadjid Atrih (Centre for Advanced Scientific Technologies) for the m6A LC-MS/MS analysis. We thank David Lilley, Tim Wilson and Adrian Whitehouse for helpful discussions. We thank Alper Akay, Martin Balcerowicz, James Lloyd, Anjil Srivastava and Carey Metheringham for comments on the manuscript. This work was supported by awards from the BBSRC (BB/V010662/1; BB/M010066/1; BB/M004155/1; BB/W007673/1) and the University of Dundee Global Challenges Research Fund to GGS and GJB; and awards from BBSRC (BB/M000338/1; BB/W007967/1) and ERA-CAPS FLOWPLAST to BD. BS is funded through the BBSRC DTP3 award, BB/T007222/1. KK and NJ were funded through the European Union Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreements 799300 and 896598, respectively. SMF is a Wellcome Trust and Royal Society Sir Henry Dale Fellow (grant number 220212/Z/20/Z). The FingerPrints Proteomics Facility of the University of Dundee is supported by a Wellcome Trust Technology Platform Award (097945/B/11/Z).

Copyright

© 2022, Parker et al.

This article is distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use and redistribution provided that the original author and source are credited.

Metrics

  • 2,769
    views
  • 353
    downloads
  • 29
    citations

Views, downloads and citations are aggregated across all versions of this paper published by eLife.

Download links

A two-part list of links to download the article, or parts of the article, in various formats.

Downloads (link to download the article as PDF)

Open citations (links to open the citations from this article in various online reference manager services)

Cite this article (links to download the citations from this article in formats compatible with various reference manager tools)

  1. Matthew T Parker
  2. Beth K Soanes
  3. Jelena Kusakina
  4. Antoine Larrieu
  5. Katarzyna Knop
  6. Nisha Joy
  7. Friedrich Breidenbach
  8. Anna V Sherwood
  9. Geoffrey J Barton
  10. Sebastian M Fica
  11. Brendan H Davies
  12. Gordon G Simpson
(2022)
m6A modification of U6 snRNA modulates usage of two major classes of pre-mRNA 5’ splice site
eLife 11:e78808.
https://doi.org/10.7554/eLife.78808

Share this article

https://doi.org/10.7554/eLife.78808

Categories and tags

Research organisms

Further reading

    1. Chromosomes and Gene Expression

    Prolonged cell cycle arrest in response to DNA damage in yeast requires the maintenance of DNA damage signaling and the spindle assembly checkpoint

    Felix Y Zhou, David P Waterman ... James E Haber
    Research Article

    Cells evoke the DNA damage checkpoint (DDC) to inhibit mitosis in the presence of DNA double-strand breaks (DSBs) to allow more time for DNA repair. In budding yeast, a single irreparable DSB is sufficient to activate the DDC and induce cell cycle arrest prior to anaphase for about 12–15 hr, after which cells ‘adapt’ to the damage by extinguishing the DDC and resuming the cell cycle. While activation of the DNA damage-dependent cell cycle arrest is well understood, how it is maintained remains unclear. To address this, we conditionally depleted key DDC proteins after the DDC was fully activated and monitored changes in the maintenance of cell cycle arrest. Degradation of Ddc2ATRIP, Rad9, Rad24, or Rad53CHK2 results in premature resumption of the cell cycle, indicating that these DDC factors are required both to establish and maintain the arrest. Dun1 is required for the establishment, but not the maintenance, of arrest, whereas Chk1 is required for prolonged maintenance but not for initial establishment of the mitotic arrest. When the cells are challenged with two persistent DSBs, they remain permanently arrested. This permanent arrest is initially dependent on the continuous presence of Ddc2, Rad9, and Rad53; however, after 15 hr these proteins become dispensable. Instead, the continued mitotic arrest is sustained by spindle assembly checkpoint (SAC) proteins Mad1, Mad2, and Bub2 but not by Bub2’s binding partner Bfa1. These data suggest that prolonged cell cycle arrest in response to 2 DSBs is achieved by a handoff from the DDC to specific components of the SAC. Furthermore, the establishment and maintenance of DNA damage-induced cell cycle arrest require overlapping but different sets of factors.

    1. Chromosomes and Gene Expression
    2. Developmental Biology

    Unified bursting strategies in ectopic and endogenous even-skipped expression patterns

    Augusto Berrocal, Nicholas C Lammers ... Michael B Eisen
    Research Advance

    Transcription often occurs in bursts as gene promoters switch stochastically between active and inactive states. Enhancers can dictate transcriptional activity in animal development through the modulation of burst frequency, duration, or amplitude. Previous studies observed that different enhancers can achieve a wide range of transcriptional outputs through the same strategies of bursting control. For example, in Berrocal et al., 2020, we showed that despite responding to different transcription factors, all even-skipped enhancers increase transcription by upregulating burst frequency and amplitude while burst duration remains largely constant. These shared bursting strategies suggest that a unified molecular mechanism constraints how enhancers modulate transcriptional output. Alternatively, different enhancers could have converged on the same bursting control strategy because of natural selection favoring one of these particular strategies. To distinguish between these two scenarios, we compared transcriptional bursting between endogenous and ectopic gene expression patterns. Because enhancers act under different regulatory inputs in ectopic patterns, dissimilar bursting control strategies between endogenous and ectopic patterns would suggest that enhancers adapted their bursting strategies to their trans-regulatory environment. Here, we generated ectopic even-skipped transcription patterns in fruit fly embryos and discovered that bursting strategies remain consistent in endogenous and ectopic even-skipped expression. These results provide evidence for a unified molecular mechanism shaping even-skipped bursting strategies and serve as a starting point to uncover the realm of strategies employed by other enhancers.

    1. Chromosomes and Gene Expression
    2. Developmental Biology

    Complex aneuploidy triggers autophagy and p53-mediated apoptosis and impairs the second lineage segregation in human preimplantation embryos

    Marius Regin, Yingnan Lei ... Claudia Spits
    Research Article

    About 70% of human cleavage stage embryos show chromosomal mosaicism, falling to 20% in blastocysts. Chromosomally mosaic human blastocysts can implant and lead to healthy new-borns with normal karyotypes. Studies in mouse embryos and human gastruloids showed that aneuploid cells are eliminated from the epiblast by p53-mediated apoptosis while being tolerated in the trophectoderm. These observations suggest a selective loss of aneuploid cells from human embryos, but the underlying mechanisms are not yet fully understood. Here, we investigated the cellular consequences of aneuploidy in a total of 125 human blastocysts. RNA-sequencing of trophectoderm cells showed activated p53 pathway and apoptosis proportionate to the level of chromosomal imbalance. Immunostaining corroborated that aneuploidy triggers proteotoxic stress, autophagy, p53-signaling, and apoptosis independent from DNA damage. Total cell numbers were lower in aneuploid embryos, due to a decline both in trophectoderm and in epiblast/primitive endoderm cell numbers. While lower cell numbers in trophectoderm may be attributed to apoptosis, aneuploidy impaired the second lineage segregation, particularly primitive endoderm formation. This might be reinforced by retention of NANOG. Our findings might explain why fully aneuploid embryos fail to further develop and we hypothesize that the same mechanisms lead to the removal of aneuploid cells from mosaic embryos.